Installation Guide

Installation

the cabinet hangs securely.

NOTE:

It is best to nd a stud in your wall to ensure

Preparing the wall

□ Place the bracket (B) against the wall and determine your

desired hanging location. Using a pencil, mark three

locations on the wall that match up with the mounting

bracket’s (B) pre-drilled holes.

Ensure the marks are horizontally straight by using a level.

Use a hammer to gently punch the anchor (AA) halfway

into the wall at each marked location. Finish screwing

in the anchor (AA) with the screwdriver.

□

Hanging the bracket

□

Align the bracket (B) holes with the anchors (AA) against the

wall.

Insert the screws (BB) through the bracket holes and into the

anchors (AA). Finish screwing in with the screwdriver.

□

Installing the shelves

Hanging the cabinet

□ Lift the cabinet (A) above the bracket (B) and place it

against the wall.

Slide the cabinet (A) down the wall, hooking it onto the

bracket (B).

□

Insert 4 shelf pins (CC) into 4 pre-drilled holes at the

desired height of the top shelf (C) inside the cabinet (A).

Repeat for the lower shelf with the 4 remaining shelf

pins (CC) and the other shelf (C).

Slide each shelf (C) into the cabinet (A) above each set

of pins (CC).

□