Installation Guide

Determine next base cabinet to be installed and repeat measuring, pre-drilling and installation, but again DO NOT
FULLY TIGHTEN. Carefully align the face frames of each cabinet with each other and “G-clamp” together. Drill a
3/32" pilot hole in three places along hinge side of frame and secure with #8 x 1¼" drywall screws.
Tw o
cabinet
installation
Cabinet with
legs installation
STEP 1
STEP 2 STEP 3
Lay cabinet on it’s side and mount the
four adjustable legs to the underside
of the cabinet. Position a leg in each
corner and make sure the attachment
plate overlays the cabinet side panels
as shown.
Before standing cabinet upright,
twist adjustment glide to fully extend
the glide or extend it to the desired
approximate height.
Complete nal adjustments to height
of cabinet by turning glide to lower to
desired height.