Item # 0000 000 000 Model # FHTS80323 USE AND CARE GUIDE WENMARE RECTANGULAR LP FIREPIT Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.
Table of Contents and Important Safety Information WARNING Table of Contents FOR YOUR SAFETY: Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Information. . . . . . . . . . . . . . . . . . . . .2 For Outdoor Use Only (outside, non-enclosed area). Do Not Use For Cooking. Installation and service must be performed by a qualified installer, service agency, or the gas supplier. Propane (LP) Dangers and Warnings. . . . . . . . . . . . . .
WARNING: Fire table is for outdoor use only. Installation and repair should be done by a qualified service person. The appliance should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required as necessary. It is imperative that the control compartment, burners and circulating air passageways of the appliance are kept clean.
Important Safety Information (continued) The use of alcohol, prescription or non-prescription drugs may impair an individual’s ability to properly assemble or safely operate this outdoor fire table. DO NOT use in an explosive atmosphere. Keep gas fire table area clear and free from combustible materials, such as gasoline. This outdoor fire table is not to be installed or used in or on recreational vehicles and/or boats. Always use in accordance with all applicable local, provincial and national codes.
Important Safety Information (continued) ATTENTION: Any alteration of the outdoor fire table that is not specifically directed in the operations manual will void manufacturer warranty. PROPANE (LP) DANGERS AND WARNINGS LP GAS LP gas is flammable and hazardous if handled improperly. Familiarize yourself with its hazards before using any LP gas product. PROPANE HAZARDS Flammable, explosive under pressure, heavier than air and settles in pools in low areas. In its natural state, propane has no odor.
Important Safety Information (continued) HOSE AND REGULATOR ASSEMBLY AND REPLACEMENT 1. This fire table comes equipped with a standard LP gas hose and regulator including the appliance side connection for a CGA No. 791 Cylinder Connection Device. The LP gas hose and regulator supplied with this fire table must be used. Only a hose and regulator specified by manufacturer can be used for replacement. a. The CGA No.
Warranty 1 YEAR FRAME LIMITED WARRANTY WHAT IS COVERED We warrant the frames to be free of manufacturing defects to the original purchaser for one year. WHAT IS NOT COVERED It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover s warranty. We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Pre-assembly (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size.
Pre-assembly (continued) PACKAGE CONTENTS A N M O B T Q F R P L E E I H F F D U G K J F S C Part Description Quantity A Burner Lid 1 WARNING: Failure to position the parts in accordance with these diagrams or failure to B C Table Top Right Front Leg 1 1 D Left Front Leg 1 appliance may result in property damage or personal injury.
Assembly 1 Attaching the Legs to the Table Top NOTE: Pay attention to the direction of control knob and the legs. They must be placed as the step shows. Place the table top (B) upside down on a soft surface. Attach the right front leg (C), left front leg (D), rear legs (E) and support legs (F) to the table top (B) using M6x15 combin ation bolts (AA), as shown below. AA AA Do not tighten the bolts at this step. AA NOTE: Loosely tighten all the bolts using hex wrench (FF).
Assembly (continued) 3 Attaching the Limit Tube to the Side Panels Attach the limit tube (L) to the left side panel (H) and right side panel (G) using M6x15 combination bolts (AA), as shown below. Do not tighten the bolts at this step. NOTE: Loosely tighten all the bolts using hex wrench (FF). AA H G L 4 Connecting the Tank Support Connect the tank support (K) to the left side panel (H), right side panel (G) using M6x40 combination bolts (BB).
Assembly (continued) 5 Connecting the Door Turn the table right side up. Connect the door (J) to the left front leg (D) using M6x12 countersunk bolt (CC) and plastic washers 1 (DD). Connect the door (J) to the tank support (K) using plastic washers 2 (EE), as shown below. Once all of the bolts are in place, fully tighten all the bolts using the hex wrench (EE). CC DD D J EE 6 K Attaching the Knob to the Door and Checking the Table Attach the knob (U) to the door (J) and tighten it clockwise.
Assembly (continued) 7 Placing the Glass Beads CAUTION: To ensure proper function, the screen on the pilot housing should be free of glass beads. T Place the glass beads (T) into the rectangular burner bowl (M). Pilot Housing M CORRECT Burner Tube do not block opening INCORRECT Pilot 8 Place The Burner Lid WARNING: Place the burner lid (A) over the rectangular burner bowl (M). Make sure to remove the burner lid before lighting.
Operation 1 Installing the LP Gas Tank CAUTION: The Make sure LP gas tank valve is closed. Loosen LP gas tank retainer bolt by turning counterclockwise. on. Secure tank by turning LP gas tank retainer bolt clockwise until tight. 2 Connecting the LP Gas Tank Before connecting, be sure there is no debris caught in the head of the LP gas tank, in the head of the regulator valve or in the head of the burner ports. Connect the regulator/hose assembly to tank by turning knob clockwise until it stops.
Operation (continued) 3 Disconnecting the LP Gas Tank NOTE: Before disconnecting make sure the LP gas tank valve is “CLOSED”. Disconnect regulator/hose assembly from LP gas by turning knob conterclockwise until it is loose. Place the protective cap cover on the LP gas tank and store it outdoors in a well-ventilated area out of direct sunlight. 4 Checking for Leaks and Burner Connections CAUTION: an explosion which can cause death, serious bodily injury or damage to property.
Operation (continued) 5 Tank/Gas Line Connection Leak Test Make 2-3 oz. of leak detection solution by mixing one part liquid dishwashing soap with three parts water. Make sure the control knob is in the “OFF” position. Connect LP gas tank per “CONNECTING LP GAS TANK” section. Turn LP gas tank valve to “OPEN”. a) If any bubbles appear, turn LP gas tank valve to “CLOSED”, reconnect and re-test.
Operation (continued) 7 Closing the Door 17 HOMEDEPOT.
Operation (continued) CAUTION: Failure to follow these instructions could cause a fire or an explosion which can cause death, serious bodily injury or damage to property. WARNING: CAUTION: CAUTION: 9.84 in-11.81in 25-30cm CAUTION: LIGHTING 1. Make sure all labels, packaging and protective films have been removed from the outdoor fire table. 2. Remove cover and burner lid (if applicable) before operating fire table. Check for obstructions of airflow to the burner.
Operation (continued) LIGHTING (CONTINUED) 11. If igniter does not light burner: a. Wearing heat-resistant gloves, position a long, lit match or long, lit butane lighter near the pilot housing. b. Push and turn control knob to “ON”. c. Remove match/lighter once burner is lit. 12. After lighting, observe the burner flame and make sure all burner ports are lit and flame height matches illustration on page 18.
Care and Maintenance Cleaning Surfaces 1. Wipe surfaces clean with mild dishwashing detergent or baking soda mixed with water. 2. For stubborn stains, use a citrus-based cleaner and a nylon scrubbing brush. 3. Rinse clean with water. 4. Allow to air dry. Before Storing 1. Turn LP gas tank valve to “CLOSED”. 2. Turn control knob to the “OFF” position. NOTE: A “poof” sound is normal as the last of the LP gas is burned. 3. Disconnect LP gas tank per “Disconnecting LP Gas Tank” section. 4. Clean all surfaces.
Troubleshooting The burner will not light using the igniter. The burner will not light with a match. The LP gas tank valve is closed. Make sure that the regulator is securely attached to the LP gas tank per the "Installing the LP Gas Tank" section. Then turn the LP gas tank valve to "OPEN." The LP gas tank is low or empty. Exchange, refill or replace the LP gas tank. The LP gas leaks. 1. Turn the LP gas tank valve to “CLOSED”. 2. Wait 5 minutes for the gas to clear. 3.
Troubleshooting The tank is out of gas. Exchange, refill or replace the LP gas tank. 1. Turn control knob to “OFF”. There is a sudden drop in gas flow, or the flame height is reduced. The overfilling prevention device may have been activated. There is an irregular flame pattern, or the flame does not run There is no gas flow. the full length of the burner. The flame is yellow or orange. 2. Wait 30 seconds and light the outdoor fire table per the “Lighting” section. 3.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service. 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.
