Instructions / Assembly

Assembly
1
Attaching the Legs to the Table Top
2
Connecting the Left Side Panel, Right Side Panel and Back Panel to the Legs
Place the table top (B) upside down on a soft surface.
Do not tighten the bolts at this step.
Attach the right front leg (C), left front leg (D), rear legs (E) and support legs (F) to the table top (B) using M6x15 combin ation
bolts (AA), as shown below.
Connect the right side panel (G) to the right front leg (C) and the rear leg (E) using M6x15 combination bolts (AA).
Connect the left side panel (H) to the left front leg (D) and the rear leg (E) using M6x15 combination bolts (AA).
Connect the back panel (I) to the rear legs (E) using M6x15 combination bolts (AA).
Do not tighten the bolts at this step.
NOTE: Pay attention to the direction of control knob and the legs. They must be placed as the step shows.
10
NOTE: Loosely tighten all the bolts using hex wrench (FF).
NOTE: Loosely tighten all the bolts using hex wrench (FF).
AA
AA
AA
B
C
D
E
E
F
F
F
F
AA
AA
G
H
I
E
E
C
D