Instructions / Assembly

6
Assembly
3
Connecting the Table Leg 1 and Table Leg 2
4
Tightening All the Bolts
Connect the table leg 1 (B) and table leg 2 (C) using M6x20 combination bolts (AA).
Once all of the bolts are in place, fully tighten all the bolts.
Turn the table right side up.
Ensure all connections are secure before use.
Store the table in a dry sheltered place when not in use.
.
Care
For best results, clean the frame with a damp cloth and dry thoroughly. This will help prevent mildew by removing dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach or solvents.
Care and Cleaning
AA
AA
AA
AA
B
C
NOTE: Loosely tighten all bolts using the hex wrench (BB).