Use and Care Manual

Assembly
1
Connecting the Legs to the Table Top
2
Connecting the Side Panels to the Legs
Place the table top (B) upside down on a soft surface.
Do not tighten the bolts at this step.
Attach the right front leg (C), left front leg (D), left rear leg (E) and right rear leg (F) to the table top (B) using
M6X15 combination bolts (AA), as shown below.
Attach the side panel (G) to the right front leg (C) and right rear leg (F) using M6X15 combination bolts (AA).
Attach the side panel (G) to the left rear leg (E) and right rear leg (F) using M6X15 combination bolts (AA).
Attach the side panel (G) to the left front leg (D) and left rear leg (E) using M6X15 combination bolts (AA).
Do not tighten the bolts at this step.
NOTE: Pay attention to the direction of control knob and the legs. They must be placed as the step shows.
10
NOTE: Loosely tighten all the bolts using hex wrench (EE).
NOTE: Loosely tighten all the bolts using hex wrench (EE).
AA
AA
E
G
AA
D
F
C
AA
E
D
AA
C
B
F