Instructions / Assembly

Assembly (continued)
7
Placing the Glass Beads
8
Placing the Burner Lid
Place the burner lid (S) over the rectangular burner bowl (M).
Make sure to remove the burner lid before lighting.
Do not place the lid back onto the rectangular burner bowl until it has cooled down.
13
L
NOTE:
If you remove the burner lid, it could be hanging on the hanger of the right side panel.
S
F
S
M
M
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Screen
CORRECT
INCORRECT
Pilot
Housing
Burner
Tube
do not block
opening
CAUTION: To ensure proper function, the screen on the pilot housing should be free of glass beads.
Place the glass beads (L) into the rectangular burner bowl (M).
WARNING:
Surfaces on the re table can remain extremely hot for a period after use.
Allow 45 minutes to cool down before touching or moving the re table.