Instructions / Assembly

2
SAFETY INFORMATION
PLANNING THE INSTALLATION
TOOLS REQUIRED
WARNING: Disconnect the power prior to removing or installing a light fixture.
 Before starting installation of this fixture or removal of a previous fixture, disconnect
the power by turning off the circuit breaker or by removing the fuse at the fuse box.
 Consult a qualified electrician if you have any electrical questions or need to replace
the driver.
 If you have any non-electrical questions about this fixture, please contact our
Customer Service Team at 1-800-345-0542.
Phillips
Screwdriver
Wire
Cutter
Wire
Stripper
Flathead
Screwdriver
Ladder
Safety
Goggles
Electrical
Tape
NOTE: Keep your receipt and these instructions for Proof of Purchase.
 Read all instructions before assembly and installation.
 Before starting installation of the fixture or removal of a previous fixture, disconnect
the power by turning off the circuit breaker or by removing the fuse at the fuse box.
 To avoid damaging this product, assemble it on a soft, non-abrasive surface such as
carpet or cardboard.