Instructions / Assembly

6
OPERATION
TROUBLESHOOTING
NOTE: Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only
a dry soft cloth to duct or wipe carefully.
EXTERIOR MAINTENANCE
 Use a dry or slightly dampened clean cloth and wipe the surface of the fixture
INTERIOR MAINTENANCE
 Disconnect power to the fixture by turning off the circuit breaker or by removing the
fuse at the fuse box.
 Use a dry or slightly dampened clean cloth to wipe the interior surface of the fixture.
Problem
Solution
The light will not turn on.
 Make sure the power supply is on.
 Test or replace the switch.
 Check the wiring.
The fuse blows or circuit breaker
trips when light is turned on.
 Check the wire connections.
 Turn on power at the circuit breaker or fuse box.
 Turn the light switch on to activate the fixture.
CARE AND CLEANING