Installation Guide

HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
1
2
Installation
5
Mounting the hardware
Connecting the wires
NOTE: If you have electrical questions consult
your local electrical code for approved
grounding methods.
EE
HH
FF
BB
FF
BB
EE
A
CC
HH
 Thread the fixture screws (FF) into the
provided holes of the mounting bracket
(HH).
 Thread the hex nuts (BB) onto the fixture
screws (FF). Do not tighten the hex nuts
(BB) at this time.
 Pull the supply wires out from the outlet
box and mount the mounting bracket
(HH) to the outlet box using the mounting
screws (EE).
 Place the fixture body (A) over the outlet
box and onto the fixture screws (FF).
 Adjust the fixture screws (FF) until they
protrude out from the fixture body (A) 1/4
in.
 Remove the fixture body (A) and secure
the position of the fixture screws (FF) by
tightening the hex nuts (BB) against the
mounting bracket (HH).
 Connect the black supply wire to the
black fixture wire using a wire nut (CC).
 Connect the white supply wire to the
white fixture wire using a wire nut (CC).
 Loop the supply ground wire around
the ground screw on the mounting
bracket and tighten it in place.
 Connect the fixture ground wire to the
supply ground wire using a wire nut
(CC).
 Wrap all wire connections with
electrical tape for a more secure
connection.