Installation Guide

Operation

 Turn on power at the circuit breaker or fuse box.

 Turn the light switch on to activate the fixture.

Care and Cleaning

EXTERIOR MAINTENANCE

 Use a dry or slightly dampened clean cloth and wipe the surface of the fixture

INTERIOR MAINTENANCE

 Disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the

fuse box.

 Use a dry or slightly dampened clean cloth to wipe the interior surface of the fixture.

Troubleshooting

Problem

Solution

The

light will not turn on.



Make sure the power supply is on.



Test or replace the switch.



Check the wiring.

The

fuse blows or circuit breaker

trips when light is turned on.



Check the wire connections.

NOTE: Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth

to dust or wipe carefully.