Installation Guide

WWW.HOMEDECORATORS.COM
Please contact 1-800-986-3460 for further assistance.
1
Mounting the hardware
 Thread the fixture mounting screws (GG)
into the provided holes of the mounting
bracket (HH).
 Thread the hex nuts (BB) onto the fixture
mounting screws (GG). Do not tighten the
hex nuts (BB) at this time.
 Pull the supply wires out from the outlet
box and mount the mounting bracket (HH)
to the outlet box using the bracket
mounting screws (FF).
 Place the back plate of the fixture body (A)
over the outlet box and onto the fixture
mounting screws (GG).
 Adjust the fixture mounting screws (GG)
until they protrude out from the back plate
1/4 in.
 Remove the fixture body (A) and secure
the position of the fixture mounting screws
(GG) by tightening the hex nuts. (BB)
2
Assembling the fixture
 Insert the shade screws (CC) into the
fixture body (A).
 Slide the metal ring (DD) into the glass
shade (B) and onto the shade screws
(CC).
 Secure the glass shade (B) to the fixture
body (A) by aligning the two shade screws
(CC) through the metal ring (DD).
 Twist the metal ring (DD), and then
tightening the shade screws (CC).
Installation
5
FF
HH
GG
BB
A
CC
B
DD