Item # 1002 438 244 Model # HD-1550-I USE AND CARE GUIDE 2-LIGHT FLUSHMOUNT Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 WWW.HOMEDEPOT.COM/HOMEDECORATORS THANK YOU line of products available for your home improvement needs.
Table of Contents Table of Contents................................2 Safety Information...............................2 Warranty........................................... 2 Pre-Installation................................3 Planning Installation ...................3 Tools Required......................................3 Hardware Included...........................3 Package Contents........................... .4 Installation..........................................5 Care and Cleaning........................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly and installation of product. To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard. Inspect each part for defects that may have occurred during shipping. Keep your receipt and these instructions for proof of purchase.
Pre-Installation (continued) PACKAGE CONTENTS Part A Description Fixture Body Quantity 1 4
Installation the electrical 1 Installing the mounting plate 2 Making connections NOTE: Always use Wire Nuts (AA) to connect wires and push all excess wires and connections back into the junction box. WARNING: Turn the power off at the main fuse box before installation. Connect the ground wire (bare copper or green wire) from the branch circuit to the Green Ground Screw (EE) on the Mounting Plate (BB). Thread the two Mounting Screws (FF) into the Mounting Plate (BB), then secure with the Hex Nuts (CC).
Installation (continued) 3 4 Installing the bulb Align the mounting holes on the Fixture Body (A) with the Mounting Screws (FF) on the Mounting Plate (BB) and secure with the Lock Nuts (GG). Install the 60W max ST58 E26 Bulbs (HH) into each socket of the Fixture Body (A).
Care and Cleaning Clean the light fixture carefully with a soft, dry cloth. Do not use any cleaner with chemicals, solvents, or harsh abrasives. Troubleshooting Problem The bulb will not light. The fuse blows or the circuit breaker trips when the light is turned on. Possible Cause Solution The bulb is burned out. Replace the light bulb. The power is off. Ensure that the power supply is turned on. The circuit breaker is off. Ensure that the circuit breaker is set to the ON position.
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service 8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-986-3460 WWW.HOMEDEPOT.COM/HOMEDECORATORS Retain this manual for future use.