LUMINOSA USE AND CARE GUIDE LED INTERIOR SCONCE Questions, problems, missing parts? Please consult your local The Home Depot store or email Customer Service scott_w_morris@bellsouth.net 8 a.m. - 5 p.m.
Table of Contents Tools Required ............................................ 3 Hardware Included ...................................... 3 Package Contents ....................................... 4 Installation ........................................... 5 Care and Cleaning ............................... 7 Troubleshooting .................................. 7 Table of Contents ................................. 2 Safety Information ................................ 2 Warranty ................................
Pre-Installation PLANNING INSTALLATION Read all instructions before assembly. Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse from the fuse box. To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard. NOTE: Keep your receipt and these instructions for proof of purchase.
Pre-Installation (continued) PACKAGE CONTENTS Part Description Quantity A Fixture 1 B Sink Screw (12 mm) 1 4
Installation 1 the cross bar to the 2 Attaching outlet box Removing the cross bar from the fixture □ Use a Philips screwdriver to unscrew the sink screw (B) from the bottom of the fixture (A). □ Remove the cross bar (AA) from the fixture (A). □ Mount the cross bar (AA) to the outlet box (not included) using the two outlet box screws (BB). 5 .
Installation (continued) 3 Connecting the electrical wires □ □ □ □ □ 4 Wrap the ground wire from the light fixture around the ground screw (CC) on the cross bar (AA). Use a wire connector (DD) to connect the ground wire from the light fixture to the ground wire from the outlet box. Use a wire connector (DD) to connect the white wire from the light fixture to the white wire (neutral wire) from the outlet box.
Care and Cleaning □ □ Clean the fixture with a soft, dry cloth. Do not use any cleaners with chemicals, solvents or hash abrasives. WARNING: Before attempting to clean the fixture, disconnect the power to the fixture by turning the breaker off or removing the fuse from the fuse box. Troubleshooting Problem The fixture will not illuminate. The fuse blows or circuit breaker trips when the fixture is illuminated. Possible Cause Solution □ The power is off. □ Ensure the power supply is On.
Questions, problems, missing parts? Please consult your local The Home Depot store or email Customer Service scott_w_morris@bellsouth.net 8 a.m. - 5 p.m., EST, Monday - Friday Retain this manual for future use.
LUMINOSA Artículo #1002 513 859 Modelo # LT1002 Modelo #JIB8411A/BN GUÍA DE USO Y MANTENIMIENTO LÁMPARA LED DE INTERIOR Preguntas, problemas o piezas faltantes? Por favor, consulte a su tienda local The Home Depot o envíe un correo electrónico al Servicio de Atención al Cliente (scott_w_morris@bellsouth.
Índice Herraminentas Necesarias ......................... 11 Hardware Incluido ..................................... 11 Contenido del Paquete .............................. 12 Instalación ..........................................13 Mantenimiento y Limpieza .................15 Solución de Problemas ......................15 Índice .................................................. 10 Información de Seguridad ................. 10 Garantía ..............................................
Pre-Instalatión PLANIFICACIÓN DE LA INSTALACIÓN Lee todas las instrucciones antes de ensamblar. Antes de comenzar la instalación o de quitar la instalación anterior, desconecte la alimentacion apagando el interruptor del circuito o quitando el fusible en la caja de fusible. Para evitar dañar el artículo, ensámblalo sobre una superficie suave, no abrasiva, como por ejemplo una alfombra o cartón. NOTA: Conserva el recibo y estas Instrucciones como Comprobante de Compra.
Pre-Instalación (continuación) CONTENIDO DEL CONTENIDO DEL PAQUETE Pieza Descripción Cantidad A Dispositivo de Iluminación 1 B Tornillo Sink (12 mm) 1 12
Instalación 1 2 Retire la barra cruzada del dispositivo de iluminación □ Use un destornillador Philips para desenroscar el tornillo sink (B) de la parte inferior del dispositivo de iluminación (A). □ Retire la barra cruzada (AA) del dispositivo de iluminación (A). Coloque la barra cruzada en la caja de salida □ Monte la barra cruzada (AA) en la caja de salida (no incluida) con los dos tornillos de la caja de salida (BB).
Instalación (continuación) 3 4 Conectar los cables electricos □ Envuelva el cable de toma de tierra de la instalación alrrededor del tornillo de toma de tierra (CC) que hay en la barra cruzada (AA). Use un conector de cable (DD) conectar cable de tierra de la instalacion con el cable de tierra de la caja de salida. □ Use un conector de cable (DD) conectar el cable blanco de la instalacion con el cable blanco (cable neutro) de la caja de salida.
Mantenimiento y Limpieza □ □ Limpia la lámpara con un paño suave y seco. No uses limpiadores con químicos, solvents, o productos abrasivos. PRECAUCIÓN: Antes de intentar limpiar la pieza,desconéctela o apague el interruptor o remueva el fusible de la caja de fusibles. Solución de problemas Problema El dispositivo de iluminación no se ilumina. El fusible se dispara o el disyuntor se dispara cuando el aparato se ilumina. Causa Posible Solución □ La electricidad está apagada.
Preguntas, problemas o piezas faltantes? Por favor, consulte a su tienda local The Home Depot o envíe un correo electrónico al Servicio de Atención al Cliente (scott_w_morris@bellsouth.net) de lunes a viernes, de 8 de la mañana a 5 de la tarde (hora oficial del este) Conserva este manual para referencias futuras.