Measurement Guide

9 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Troubleshooting
FACTORY RESET
To perform a factory reset on the motor module, press and hold the button on the electronic endcap for 10 seconds. The button LED will blink
3 times alternating between red and blue. A factory reset will erase all calibration settings or programs/schedules that have been stored on the
motor module.
SBMC01 LED Displays End Cap LED
Mode Color Indication Speed (Blinks Per Minute)
Low Battery Red 6 bpm
Error Mode Red 175 bpm
Pairing Mode Blue 60 bpm
Successful Pairing Blue 600 bpm
Receive Identity Command Blue Solid blue/10 seconds
Calibration Mode Blue 60 bpm
Calibration Save Blue Solid blue/5 seconds
Save Favorite Position Blue Blinks 3 times@150 bpm
Factory Reset Red/Blue Alternate red and blue blinking 3 times each
Charging (Adaptor only) Red 25 bpm