Manualshelf

Instructions / Assembly

ManualsBrandsHome Decorators Collection ManualsFlooringBarrel Wood Light 7 mm Thick x 2 in. Wide x 94 in. Length Coordinating Vinyl 3-in-1 Molding
12345678910
2”
1/4”
3/4”
9/16”1/8”
3/16”
7/16”
9/16”
1/4”
1.75”
3
31
in
Installationadvice.com Solutions & To o l s for problems that may arise
Slim Trim
1
SlimTrim Technical Information & Applications*
SlimTrim
Our SlimTrim 3-in-1 Molding functions as a Reducer, T-Molding, and End Cap.
Comes with SlimTrack & Versatrack Shim for floors up to 1/4” (6.35mm) or dowels for
floors up to 3/4” (19mm). See illustrations below for details.
Surface Material: High Wear Resistant Aluminum Oxide Laminate
Core Material: PVC
SlimTrack
To be used with SlimTrim for floors up to 1/8” (3mm) thickness. Also, used in
conjunction with the Versatrack Shim for 1/8“-1/4”* (3-6.35mm)
. See illustrations
below for details.
Material: Cold Roll Steel
* For floors thicker than 1/4” (6.35mm), use dowel installation
Dowel
To be used with SlimTrim for floors up to 3/4” (19mm). Comes as a tree of 8 dowels.
Material: Polystyrene
*Sold at your local hardware store
Slim Trim-P29
SlimTrack Shim
WPC Floors
1
1/4-3/8”
(6.35-9.5mm)**
as a Reducer
as a Transition
Slim Trim-P54
SlimTrack 2 Shims
2
1/4-3/8”
(6.35-9.5mm)**
1 32
Reducer:
Laminate Floors
Must Be Glued to
Non-Floating Surface
Up to 3/4”
(0-19mm)**
Up to 3/4”
(0-19mm)**
Up to 3/4”
(0-19mm)**
Transition:
Dowel
End Cap: (Hard Surface to Carpet)
A Carpet Tap
Down Trim**
MUST be Used
When Installing
Slim Trim on
Carpet
LVT Floors
Reducer:
1 2 3
Transition:
ShimTrackTrack Track Shim
1/16 to 1/8”
(1.6-3mm)**
1/8-1/4”
(3-6.35mm)**
Up to 1/4”
(0-6.35mm)**
Carpet Tap
Down Trim
End Cap:
(Hard Surface to Carpet)
Up to 1/4”
(0-6.35mm)**
Carpet Tap
Down Trim
*The installation instructions shown on this page are suggestions of how to install our moldings. Versatrim does not assume responsibility for any product failure or liability due to installations that
are in violation of the flooring manufacturer's installation guidelines and/or warranties.
**All references to flooring thickness refer to the total thickness of all members of the floor installation being laid upon the subfloor. This typically is comprised of the flooring plank, e.g.
Vinyl or Laminate, the underlayment, either attached or loose lay and any additional vapor barriers.

Summary of content (15 pages)