Ships in 7-10 Days All Plywood Construction Soft Close Doors & Drawers Factory Built in the USA Limited Lifetime Warranty SPECIFICATION GUIDE TRADITIONAL SEMI-CUSTOM KITCHEN AND BATH CABINETRY For use with 20/20 catalogs: HOME_DEC, HOME_DC2 hdckitchens.
Semi-Custom Kitchen & Bath Cabinetry Limited Lifetime Warranty Home Decorators Collection (warrantor) warrants to the original consumer purchaser, that all products manufactured or supplied by warrantor will be free from defects in material and workmanship. This warranty is for your lifetime as long as you own the cabinetry, on product used for Residential Purposes only and is not transferable to subsequent owners. Proof of Purchase is required.
Table of Contents Door Styles ....................................................................................................... 2-3 Cabinet Construction............................................................................................ 4 Customization Options.......................................................................................... 5 Matching Interior Options...................................................................................... 6 Style Tips ...................
Shaker Square Recessed Panel Door Styles Newport Pacific White (NPW) - 3/4" thick x 3” wide MDF Shaker framed doors with 5/8” thick solid MDF center panels - Soft close hinges & full extension drawers with soft close - 3/4" thick x 3” wide MDF Shaker framed drawer fronts with 5/8” thick solid MDF recessed center panels - Available in White painted finish - 3/4" thick x 3” wide MDF Shaker framed doors with 5/8” thick solid MDF center panels - Soft close hinges & full extension drawers with soft close -
Thermofoil Door Styles Winchester Vesper White (WVW) - 3/4" thick vinyl clad MDF recessed panel doors with flat melamine back - Available in White - 3/4" thick vinyl clad MDF recessed panel drawer fronts with flat melamine back - Not available with glass doors - Soft close hinges & full extension drawers with soft close - Decorative hardware required - Available with open cabinets Washington Veiled Gray (WVG) - 3/4" thick vinyl clad MDF recessed panel doors with flat melamine back - Available in Gray
Standard Cabinet Construction 4 5 2 10 3 INTERIOR Natural birch vinyl laminate provides a durable, wipe clean finish. 2 FACE FRAME 1½” wide x 3/4" thick solid hardwood pocket screwed. 3 END PANELS 1/2" thick CARB2 plywood, exterior vinyl laminate is color matched to the face frame. 4 FLOOR & CEILING 1/2" thick CARB2 plywood, both sides captured by end panels. 5 BACK PANELS 1/2" thick CARB2 plywood with natural birch vinyl laminate interior and raw exterior.
Customization Options FINISHED END OPTIONS 1. All Cabinet Sides are manufactured from ½” thick CARB2 compliant plywood covered with a vinyl laminate which is color-matched to the face frame and doors. CUSTOM DEPTH CABINET TYPE 12" DEEP WALL 24" DEEP WALL STANDARD BASE * BASE DRAWER * TALL UTILITY/LINEN 2. Optional Matching End Panels are ¾” thick overlay panels that match the construction of the door style selected.
Matching Interior Options Wall Cabinets prepared for glass (PFG) Wall Cabinets with no doors (ND) Found on pages 14-17 Found on pages 18-21 - Wall cabinets traditional door frames will be routed and prepared for clear glass (PFG).
Style Tips Add a new level to your island by using desk height cabinets. These are good for baking area’s or kids work spaces. To create the decorative panel look on the side of unique spaces, you can use our fillers and cut them to fit on the job site. Turn your laundry room into a room you enjoy being in! Add a large sink and drawers for easy clean-up and storage. Open shelves give easy access and an open feel to your new space.
Style Tips Need a nice square post for your island, or want a raised bar? Use fillers to create a square post to the width and height of your choosing. This image uses 6” wide fillers, however 3” wide fillers can be used as well. To create the apron under the countertop turn fillers horizontally and cut to fit on the job site. Want countertop storage that is behind closed doors? Use wall bridge cabinets in 18” high, placed under standard wall cabinets to create this space.
Wall Cabinets WALL CABINET CODING 15" High Double Door STANDARD (12" DEEP) REFRIGERATOR (24" DEEP) W 30 30 W 36 24 18 Cabinet Code Cabinet Width Cabinet Height Cabinet Code Cabinet Width Cabinet Depth DEPTH ", 36" 30", 33 Cabinet Height · All wall cabinets are 12" deep unless otherwise noted. Actual height of 24" high cabinets is 23½" overall. Refrigerator wall cabinets are 24" deep.
Wall Cabinets 18" High x 24" Deep Double Door ", 36" 24”, 30 18" CUSTOM 30" High Single Door DEPTH 1" 5", 18", 2 9", 12", 1 W242418 W302418 W362418 DEPTH SPECIFY RIGHT or LEFT HINGED W0930 W1230 W1530 W1830 W2130 30" 24" 12" - No adjustable shelf - Must be installed between two cabinets, cabinet and wall, or supported by refrigerator panels (RP) - CUSTOM DEPTH: 16" to 23" deep - Two adjustable shelves - CUSTOM DEPTH: 5" to 15" deep 24" High Double Door 36" High Single Door CUSTOM DEPTH " 3
Wall Cabinets 30" High Double Door CUSTOM 30" High Double Door with Pull Down Chrome Shelves DEPTH , 36" 0", 33" ", 3 24", 27 30" W2430 W2730 W3030 W3330 W3630 24" - Field install at desired height in cabinet - Two tier chrome shelves lowers 10" and brings items forward 14¾" 30" - Gas assisted mechanism smoothly raises and lowers unit - Locking arm feature holds shelf in down position 12" 12" - Two adjustable shelves - CUSTOM DEPTH: 5" to 15" deep 36" High Double Door CUSTOM , 36" 0", 33"
Wall Cabinets 30" High Double Door with Pull Down Frosted Shelves 30" High Wall Angle SPECIFY RIGHT or LEFT HINGED Wall Corner 24" W2430-PDSFR - Field install at desired height in cabinet - Features 5 removable acrylic storage bins - Lowers items 10" and brings forward 14¾" - Gas assisted mechanism smoothly raises and lowers unit 30" 12" WA2430 Wall Corner 20" 20" 20" 20" - Two adjustable shelves - Clip corner back provides clearance for installation - Clip corner back is 1/4" plywood 36" High Do
Wall Cabinets 36" and 42" High x 15" Deep Wall Angle 27" 23" Wall Corner 27" WA271536 WA271542 23" DEPTH SPECIFY RIGHT or LEFT BLIND WBCU2742 42" 27" 36" or 42" CUSTOM 24" SPECIFY RIGHT or LEFT HINGED Wall Corner 27" 42" High Wall Blind Corner 15" 23" Blind Closure Panel 15" 36" or 42" 23" 15" 15" 15" 15" - Three adjustable shelves 15" 15" - Clip corner back provides clearance for installation - Clip corner back is 1/4" plywood 30" High Wall Blind Corner CUSTOM DEPTH 24" SPECIFY
Wall Cabinets with Glass Doors WALL CABINET CODING 15" High Double Door STANDARD (12" DEEP) REFRIGERATOR (24" DEEP) W 30 30 W 36 24 18 Cabinet Code Cabinet Width Cabinet Height Cabinet Code Cabinet Width Cabinet Depth 12" High Double Door ", 36" 24", 30 DEPTH ", 36" 30", 33 Cabinet Height · Standard wall cabinets are 12" deep. Refrigerator wall cabinets are 24" deep.
Wall Cabinets with Glass Doors 18" High x 24" Deep Double Door ", 36" 24”, 30 18" CUSTOM 30" High Single Door DEPTH 1" 5", 18", 2 9", 12", 1 W242418PFG W302418PFG W362418PFG CUSTOM DEPTH SPECIFY RIGHT or LEFT HINGED W0930PFG W1230PFG W1530PFG W1830PFG W2130PFG 30" 24" 12" - No adjustable shelf - Must be installed between two cabinets, cabinet and wall, or supported by refrigerator panels (RP) - CUSTOM DEPTH: 16" to 23" deep - Two adjustable shelves, matching cabinet finish - CUSTOM DEPTH: 5" to
Wall Cabinets with Glass Doors 30" High Double Door CUSTOM 30" High Wall Angle DEPTH 3", 36" , 30", 3 " 24", 27 30" W2430PFG W2730PFG W3030PFG W3330PFG W3630PFG 12" SPECIFY 20" or LEFT HINGED RIGHT Wall Corner Wall Corner WA2430PFG 20" 20" 20" - Two adjustable shelves, matching cabinet finish - Two adjustable shelves, matching cabinet finish - CUSTOM DEPTH: 5" to 15" deep 36" High Double Door ", 30", 24", 27 CUSTOM " 33", 36 36" DEPTH - Clip corner back provides clearance for installa
Glass Wall Cabinets with Glass Doors 36" and 42" High x 15" Deep Wall Angle 23" WA271536PFG WA271542PFG 27" Wall Corner DEPTH SPECIFY RIGHT or LEFT BLIND WBCU2742PFG 42" 15" 27" 27" CUSTOM 24" SPECIFY RIGHT or LEFT HINGED Wall Corner 27" 42" High Wall Blind Corner 23" 23" 36" or 42" Blind Closure Panel 15" 36" or 42" 23" 15" 12" 15" 15" 15" 15" 15" 15" - Three adjustable shelves, matching cabinet finish - Clip corner back provides clearance for installation - Clip corner back is 1/4
Wall Cabinets with No Doors WALL CABINET CODING 15" High No Door STANDARD (12" DEEP) REFRIGERATOR (24" DEEP) W 30 30 W 36 24 18 Cabinet Code Cabinet Width Cabinet Height Cabinet Code Cabinet Width Cabinet Depth DEPTH ", 36" 30", 33 Cabinet Height · Standard wall cabinets are 12" deep. Refrigerator wall cabinets are 24" deep.
Wall Cabinets with No Doors 18" High x 24" Deep No Door CUSTOM DEPTH ", 36" 24”, 30 30" High No Door 1" 5", 18", 2 9", 12", 1 W242418ND W302418ND W362418ND 18" 30" CUSTOM DEPTH W0930ND W1230ND W1530ND W1830ND W2130ND 24" 12" - No adjustable shelf - Must be installed between two cabinets, cabinet and wall, or supported by refrigerator panels (RP) - CUSTOM DEPTH: 16" to 23" deep - Two adjustable shelves, matching cabinet finish - CUSTOM DEPTH: 5" to 15" deep 24" High No Door 36" High No Door C
Wall Cabinets with No Doors 30" High No Door ", 30", 24", 27 CUSTOM " 33", 36 30" 30" High Wall Angle DEPTH WA2430ND Wall WallCorner Corner W2430ND W2730ND W3030ND W3330ND W3630ND 20" 20" 20" 20" 12" - Two adjustable shelves, matching cabinet finish - Two adjustable shelves, matching cabinet finish - Clip corner back provides clearance for installation - CUSTOM DEPTH: 5" to 15" deep - Clip corner back is 1/4" plywood 36" High No Door ", 24", 27 CUSTOM ", 36" 30", 33 36" DEPTH 36" High
Wall Cabinets with No Doors 36" and 42" High x 15" Deep Wall Angle WA271536ND WA271542ND Wall Corner CUSTOM DEPTH 24" SPECIFY RIGHT or LEFT BLIND 23" 27" Wall Corner 27" 42" High Wall Blind Corner 27" 27" 23" 15" WBCU2742ND 42" 23" 15" 36" or 42" 36" or 42" 23" Blind Closure Panel 15" 15" 15" 15" 15" 15" - Three adjustable shelves, matching cabinet finish - Clip corner back provides clearance for installation - Clip corner back is 1/4" plywood 30" High Wall Blind Corner CUSTOM D
Wall Cabinets Range Hood Combo - Straight Valance WRHC36S " .38 17 Range Hood Combo - Arched Valance 9.69" 9.69" " 31 able imm 19.32" Tr 10.84" " 8 2.8 2 " 19" 20.08" WRHC36A 8" .3 17 36 " 3 1 8.3 - Available 36" width - Includes Hood, Chimney, Hood Liner and Blower - Chimney is trimmable to adjust the height - Blower is 390 CFM, 6.0 sones, enclosed light - Clearance of 3" on each side is recommended - Available in 36" width " 31 able imm Tr 19.32" 10.84" " 8 4.8 2 " .
Base Cabinets BASE CABINET CODING 24" Deep Double Door B 30 - 2T Cabinet Code Cabinet Width " 33", 36 DEPTH 24" B33 B36 Customization (2ROTS) · · · · Standard Base Cabinets are 24" deep and 34½" high Desk Height base cabinets are 21" deep and 28½" high Cabinet depth does not include door thickness Products are available in all door styles unless stated otherwise · Standard cabinet exterior is color matched to face frame · Base cabinets are shipped with an unfinished toekick.
Base Cabinets 24" Deep Double Door with 1 Roll-Out Tray " 33", 36 24" Deep Double Door with 2 Roll-Out Trays B33-1T B36-1T 24" " 33", 36 34½" 24" B33-2T B36-2T 34½" 21" 21" - One full-depth adjustable shelf - One full width roll-out tray NOTE: Roll-out trays are not full extension, soft close or adjustable - Two full-depth roll-out trays 24" Deep Single Door with 1 Chrome Roll-Out Tray 24" Deep Single Door with 2 Roll-Out Trays SPECIFY RIGHT or LEFT HINGED 1" ", 18", 2 12", 15 " 15", 18 B1
Base Cabinets 24" Deep Single Door with 2 Chrome Roll-Out Trays " 15", 18 24" 24" Deep Double Door with 2-Tier Cookware Organizer SPECIFY RIGHT or LEFT HINGED 24" 24" B24-CWO B15-2WT B18-2WT 34½" 34½" 21" 21" - FIELD INSTALLED - Two full width chrome wire roll-out trays - Features 100lb rated full-extension, ball bearing slides (not soft close) - (3) adjustable heights - Floor, side, and rear mounted - FIELD INSTALLED - Two chrome wire tiers operate independently - Adjustable dividers on bottom
Base Cabinets 24” Deep Single 35 qt. Waste Basket Pullout " 15", 18 24” Deep DELUXE Double 35 qt.
Base Cabinets 24" Deep Base Cooktop - Single False Front 30" 24" 24" Deep Farm Sink Base 36" BCT30 CUSTOM DEPTH 24" FSB36 13½" 34½" 34½" 21" 21" - False top drawer front - Two deep drawers - Accepts drop-in cooktop - Front rail is field modified to fit sink - No shelf - CUSTOM DEPTH: 9" to 23" deep 24" Deep Base Cooktop - Double False Front 21" Deep Single Door Sink Base 36" 24" SPECIFY RIGHT or LEFT HINGED BCT36 21" SB21 24" 34½" - Maximum sink cutout 19" wide - No shelf - False drawe
CUSTOM DEPTH 24" 30" 24" Deep Blind Base Corner DEPTH SPECIFY RIGHT or LEFT BLIND 34½" BBCU39 - Blind Closure Panel Indicate R or L for blind side (right shown) Cabinet can be pulled for exact fit (see installation chart) 3" filler & 3/16" blind closure panel included Door width is 11-¾” CUSTOM DEPTH: 9" to 23" deep 33" and 36" Easy Reach 33", 3 6" 3 8" 23 / - Indicate R or L for blind side (right shown) Cabinet can be pulled for exact fit (see installation chart) 3" filler & 3/16" blind clos
Base Cabinets 33" and 36" Easy Reach Super Suzan Wall Corner 33", 3 6" 3 8" 23 / 23 3/8 " 24" Deep Base Pantry Pullout SPECIFY RIGHT or LEFT HINGED 9", 12" BPPO9 BPPO12 24" EZR33SS EZR36SS 24" 34½" 34½" 21" 2" 9",1 9", 12" 21" - Two 26" or 28" diameter, pie-cut independently revolving all wood shelves - Doors open 170 degrees for easy access - Available in 9" & 12" width cabinets - Clip corner is 1/4" plywood - Full extension ball bearing slides provide stable, smooth pullout function
Base Cabinets 24” Deep End Panel with 1 ½” wide Filler 24” Deep End Panel with 3” wide Filler BP1.
Base Cabinets with No Doors BASE CABINET CODING 24" Deep Single Full Height No Door 21" 15", 18", 9", 12", B 30 Cabinet Code Cabinet Width 24" 34½" · Standard Base Cabinets are 24" deep and 34½" high CUSTOM DEPTH B09ND B12ND B15ND B18ND B21ND · Matching interiors are standard in base cabinets with no doors · Standard cabinet exterior is color matched to face frame · Base cabinets are shipped with an unfinished toekick.
Base Cabinets Design Tips Designing Around a Range Clearance for Roll Out Trays Make sure to give landing space on each side of a cooking appliance when placing in design. Be sure to leave enough clearance for doors to open at least 90 degrees. This will allow the roll out trays to be operated correctly.
Tall Cabinets TALL CABINET CODING 24" Deep Two Door Utility CUSTOM DEPTH 18" U 24 24 84 SPECIFY RIGHT or LEFT HINGED 24" U182496 42" Cabinet Code Cabinet Width Cabinet Depth Cabinet Height - One fixed shelf dividing upper and lower doors, five adjustable shelves - Optional rollout trays or additional shelves available - TSK96 is recommended if the cabinet will be on the end of a run * Loose toe kick box for ease of installation - CUSTOM DEPTH: 9" to 23" deep 96" · Standard Tall Cabinets are 2
Tall Cabinets 24" Deep Two Door Utility with Four Rollout Trays 18" SPECIFY RIGHT or LEFT HINGED 24" 24" Deep Four Butt Door Utility with Four Rollout Trays 24" U242484-4T 24" U182484-4T 30" 30" - One fixed shelf dividing upper and lower doors - Four repositionable, full width rollout trays 84" 84" - Four repositionable, full width rollout trays - One adjustable shelf - One adjustable shelf 21" 21" 24" Deep Two Door Utility with Four Rollout Trays 18" SPECIFY RIGHT or LEFT HINGED 24" 24" D
Tall Cabinets 24" Deep Two Door Utility with Four Pull-out Chrome Trays 18" 24" Deep Universal Oven SPECIFY RIGHT or LEFT HINGED 33" U182484-PO4WS 24" - FIELD INSTALLED PULL-OUT UNIT - Pull-out unit includes 4 chrome baskets and optional door mounts - Top and bottom glides are soft closing and 250 lb.
Tall Cabinets 24” Deep Refrigerator Panel with 1 ½” wide Filler ½" 24” Deep Refrigerator Panel with 3” wide Filler RP384 RP390 RP396 ½" RP1.584 RP1.590 RP1.
Tall Cabinets with Glass Doors TALL CABINET CODING 24" Deep Four Butt Door Utility with Four Rollout Trays 24" U 24 24 84 24" 30" Cabinet Code Cabinet Width Cabinet Depth Cabinet Height · Standard Tall Cabinets are 24" deep 84" · Add door thickness for total cabinet depth · Clear glass ships separate from cabinets · Standard cabinet exterior is color matched to face frame · Matching interiors are standard in PFG cabinets 21" · Soft close hinges 24" Deep Four Butt Door Utility CUSTOM DEPTH 2
Glass Tall Cabinets with Glass Doors 24" Deep Universal Oven 33" 24" Deep Two Door Utility OC332484PFGU 18" 24" 18" 84" 21" - Upper doors prepped for glass, matching cabinet interior throughout - Consult chart for oven cutout dimensions - No adjustable shelf - 3 field removable drawers - 3" stiles in oven compartment - For frame openings refer to page 61 CABINET MIN. CUTOUT WIDTH MAX CUTOUT WIDTH MIN.
Tall Cabinets with Glass Doors 24" Deep Two Door Utility with Four Rollout Trays 18" 24" SPECIFY RIGHT or LEFT HINGED 24" Deep Two Door Utility with Four Pull-out Chrome Trays 18" U182484PFG-4T 30" 84" - Four repositionable, full width rollout trays in solid finger jointed hardwood; not a part of the matching cabinet interior - One adjustable shelf 21" 21" 24" Deep Two Door Utility with Four Rollout Trays 18" 24" SPECIFY RIGHT or LEFT HINGED U182490PFG-4T 36" - Upper doors prepped for glass, mat
Tall Cabinets with No Door TALL CABINET CODING 24" Deep No Door Utility 24" U 24 24 84 CUSTOM DEPTH 24" U242484ND 30" Cabinet Code Cabinet Width Cabinet Depth - One fixed shelf dividing upper and lower section, four adjustable shelves - CUSTOM DEPTH: 9" to 23" deep Cabinet Height 84" · Standard Tall Cabinets are 24" deep · Standard cabinet exterior is color matched to face frame · Matching interiors are standard in tall cabinets with no doors 21" 24" Deep No Door Utility 24" 18" CUSTOM DEPTH
Tall Cabinets Design Tips Decorative Ends for Tall Cabinets Clearance for Roll Out Trays For decorative ends on a tall 24" deep cabinet use a CFOU and a tall skin. Customizing the Depth of a Tall Cabinet Make sure to leave enough clearance for door to open at least 90 degrees when placing next to wall or refrigerator cabinet.
Vanity & Desk Cabinets VANITY CABINET CODING 21" Deep Double Door Vanity Base " 33", 36 STANDARD 21" 21" DEPTHS VSB 30 21 Cabinet Code Cabinet Width VB3321 VB3621 Cabinet Depth 34½" · Standard Vanity Base Cabinets are 21" deep and 34½" high CUSTOM DEPTH · Cabinet depth does not include door thickness · Custom Depths are available where indicated. Use Standard Base Cabinet coding to order as specified.
Vanity & Desk Cabinets 21" Deep Double Door Vanity Sink Base 21" Deep Double Full Height Door Vanity Base STANDARD " 33", 36 3", 36" ", 30", 3 24", 27 21" DEPTHS 21" VSB3321 VSB3621 STANDARD 21" VB2421FH VB2721FH VB3021FH VB3321FH VB3621FH 34½" 34½" CUSTOM DEPTH CUSTOM DEPTH 18" 18" FOR CUSTOM DEPTHS FOR CUSTOM DEPTHS - No shelf, two false fronts · Order SB33 or SB36 · Select 9" to 23" depth 21" Deep Single Full Height Door Vanity Base 1" ", 18", 2 12", 15 21" · Order B24FH, B27FH, B3
Vanity & Desk Cabinets DKD30 21" Deep Desk Knee Drawer - One full width pencil/cosmetic drawer 17" ¼" 26 12 " 4-7/8" " 28 - Knee drawer is designed for use between two base cabinets NOTE: Full Extension Soft-Close Runner Not Available - Comfortable height for dressing table or writing surface when installed at 28½" height with 1½" thick countertop NOTE: Not available in WVW or WVG door styles - Slab drawer front all door styles - May be trimmed up to 1" on each side " 30 Vanity Cabinets with No
Vanity Linen Cabinets 21" Deep Two Door Linen 21" Deep Four Door Linen STANDARD SPECIFY RIGHT or LEFT HINGED STANDARD 18" 21" DEPTH 21" DEPTH 21" 24" VLC242184 21" VLC182184 30" 30" 84" 84" 18" CUSTOM 18" DEPTH FOR CUSTOM DEPTHS · Order U182484 · Select 9" to 23" depth - One fixed shelf dividing upper and lower doors, four adjustable shelves CUSTOM DEPTH Note: Roll out trays not available for Vanity Linen Cabinets or reduced depth cabinets.
Vanity Linen Cabinets with Glass Doors VANITY CABINET CODING 21" Deep Four Door Linen STANDARD 21" DEPTH VLC 30 21 Cabinet Code Cabinet Width 24" VLC242184PFG 21" Cabinet Depth 30" · Standard Vanity Cabinets are 21" deep · Cabinet depth does not include door thickness · Custom Depths are available where indicated. Use Standard Base Cabinet coding to order as specified.
Vanity Linen Cabinets with No Doors VANITY CABINET CODING 21" Deep Four Door Linen STANDARD 21" DEPTH VLC 30 21 Cabinet Code Cabinet Width 24" VLC242184ND 21" Cabinet Depth 30" · Standard Vanity Linen Cabinets are 21" deep · Custom Depths are available where indicated. Use Standard Base Cabinet coding to order as specified.
Accessories Spice Drawer Insert Knife Block Insert 4", 27" ", 21", 2 15", 18 ", 21" 15", 18 SDI15 SDI18 SDI21 SDI24 SDI27 - Solid hardwood drawer insert KBI15 KBI18 KBI21 - Solid hardwood drawer insert - One full width front utensil compartment - Three 5" high angled tiers - Rear 4" deep compartment KBI15: 10 knife slots + utensil compartment (fits B15, BD15) KBI18: 13 knife slots + utensil compartment (fits B18, BD18, B36, BD36) KBI21: 16 knife slots + utensil compartment (fits B21) - Sized to fi
Accessories Rollout Tray Kits 12 Base Cabinet Shelf Kits " 33",36 7",30", ",24",2 8",21 ",15",1 4" 20" ROT12 ROT18 ROT24 ROT15 ROT21 ROT27 ROT30 ROT36 ROT33 NOTE: Roll out trays not available for Vanity Linen Cabinets or reduced depth cabinets. NOTE: The roll out trays are natural birch in color and will not be color matched if added to a PFG or No door cabinet with matching interior.
Accessories Matching Interior Base Cabinet Shelf Kits SK1224MI SK2124MI SK1524MI SK2424MI SK1824MI SK2724MI Matching Interior Wall Cabinet Shelf Kits SK2112MI SK2412MI SK2712MI SK1212MI SK1512MI SK1812MI SK3024MI SK3324MI SK3624MI SK3012MI SK3312MI SK3612MI - Shelf kits are 3/4" thick plywood finished with vinyl laminate and matching edgebanding color matched to cabinetry face frame - Shelf kits are 3/4" thick plywood finished with vinyl laminate and matching edgebanding color matched to cabinetry f
Accessories Cabinet Fronts Only (CFO) 8’ Finished Toe Kick – Matches Frame Color MTK8 1⁄8" Most Wall cabinets can be ordered as “Cabinet Fronts Only”. Face frame, doors, hinges and bumpers will be supplied and shipped loose. 8' 4½" Please consult CFO availability guide on page 63.
Accessories U-Shaped Tray Divider 3" - Chrome Sink Base Liner 28½" or 34½" USTD3-CR SBL2730 SBL3336 23¼" 9 7�8" 11¾" - Helps protect sink cabinet from damage due to leaks in piping or drains - Sleek surface for easy cleanup - SBL2730 can be trimmed to fit SB27 or SB30 - SBL3336 can be trimmed to fit SB33 or SB36 - Field installed - Grey polystyrene easy to clean surface - Not for use in custom-depth cabinetry 3" - Bakeware Organizer Use 2 or more to organize cabinet Can be used in base or wall cabin
Accessories Filler Strips Tall Filler Strips FS30 FS36 FS42 FS84 ¾" FS630 FS636 FS642 FS84 FS90 FS96 FS696 84" 90" 96" - 3/4" thick solid wood - 3/4" thick solid wood - Face and sides finished - Face and sides finished 3", 6" Angle Fillers Spindle 3 1/2"W AF330 AF342 ¾" 45° 3 1/2"D 341/2" 3" 135° 30" SPL Top View 3 1/2"W 3 1/2" D Top View 3" 341/2" - 3/4" thick solid wood - Face and all edges finished 4¼" - Solid hardwood - Only available in CN and PW Valance Heat Shield VA48
Accessories Fineline LED Stick Lights 5000K Cool Light 24" Stick Light Linking Cord L08STK L12STK - Easy way to provide smooth, linear lighting almost anywhere 1.5W LED Pockit Light 5000K - Nickel L24LNK - Connector cords for connecting FineLine LED lights together 60W Power Supply 12V DC w/2 Mount Blocks L1.
Molding Soffit Crown Molding SCM8 8' Scribe Molding SM8 ¼" 8' 19/16" ¾" 19/16" - 3/4" thick solid wood - Use with TMMS8 for top of cabinet installation - Available in all styles except VW and VG Classic Crown Molding - 1/4" thick solid wood CCM8 BM8 Batten Molding 8' 8' ¼" 3 5/8" ¾" ¾" 2¾" - 3/4" thick solid wood - Use with TMMS8 for top of cabinet installation - Only available in PW Inside Corner Molding - 1/4" thick solid wood ICM8 Angle Crown Molding ACM8 8' 8' 25/8" ¾" 1 7
Molding Quarter Round QR8 CM8 2 5/8" 8' ¾" 8' Crown Molding ¾" 3" - 3/4" thick solid wood - Use with TMMS8 for top of cabinet installation - Available in all styles except VW and VG - 3/4" thick solid wood TMMS8 Top Molding Mounting Strip 8' Beaded Light Rail BLR8 8' Mounting Strip 2" ¾" 1" Molding - 3/4" thick solid unfinished wood - Recommended for installation of ACM8, CM8, CCM8, SCM8 moldings 13/16" - 1" thick solid wood Classic Light Rail CLR8 Furniture Base Molding FBM8 3/16"
Decorative Hardware NEW! - Matte black NEW! - Brushed nickel NEW! - Champagne Bronze DH873-96CHBR 4-1/4" Square Bar Pull DH801-96MBL 4-1/4" Square Bar Pull DH801-96BRN 4-1/4" Square Bar Pull 3¾" center (96mm) 3¾" center (96mm) 3¾" center (96mm) DH801-128MBL 5-1/2" Square Bar Pull DH801-128BRN 5-1/2" Square Bar Pull DH873-128CHBR 5-3/8" Square Bar Pull 5" center (128mm) 5" center (128mm) 5" center (128mm) DH00801-17MBL 6-3/4" Square Bar Pull DH00801-17BRN 6-3/4" Square Bar Pull DH873-160CHB
Decorative Hardware - Brushed steel - Euro railing pull - Brushed nickel - Brushed nickel - Features dual mounting hole options DH45-100 - 6 15/16" Euro Pull DH44-346 - 8" Square Bar Pull DH116-120 - 10" Quadra Pull 3-13/16" center (96mm) 7½" center (196mm) 5" inside center (128mm) 8-13/16" outside center (224mm) DH45-102 - 10 3/4" Euro Pull 7-9/16" center (192mm) DH45-104 - 14 7/8" Euro Pull* DH44-348 - 9" Square Bar Pull 8-13/16" center (224mm) DH116-122 - 11" Quadra Pull DH44-350 - 13" Squa
Decorative Hardware DH43-826 DH43-630 - Elongated oval knob - Antique pewter - 2" length - Elongated oval knob - Oiled bronze - 2" length DH43-828 DH43-632 - Classic pull Antique pewter 3-3/4" center (96mm) 4-3/4" outside length - DH43-124 - Octagon knob - Antique silver - 1-3/8" diameter DH43-114 - Traditional pull Antique silver 3-3/4" center (96mm) 4-1/2" outside length DH93-152 - Raised mitered knob - Antique pewter - 1-3/8" square DH93-112 Classic pull Oiled bronze 3-3/4" center (96mm)
Cabinet Frame & Opening Dimensions 24" 30" 36" or 42" 9" 3 3 60 27" 33" or 39" Wall Blind Wall Blind 9" 3"
Cabinet Frame & Opening Dimensions 3 NOTE: 96" TALL CABINETS ARE SUPPLIED WITH LOOSE TOE KICK BOX (EXPOSED SIDES REQUIRE TSK96) 61
Cabinet Frame & Opening Dimensions 21",24",27",30",or 33" 11/2" 131/2",15" 3" 131/2",15" 6" 1 ½” 2" 13 ½” 30” Double Door Base 341/2" FSB36 1 ½” 11/2" 19" 15” 11/2" 1 ½” 41/2" 36” 24",27",30",33",36" NOTE: B27, B30 have full width drawers BBCU42 1 ½" 12" 9" BBCU39 1 ½" 1 ½" 9" 12" 9" 1 ½" 9" 1 ½" 6" 30" 19" 27" 30" 1 ½" 4 ½" 4 ½" 1 ½" 36" 30" DRAWER BOX INSIDE DIMENSIONS SHALLOW DRAWER CABINET HEIGHT DEPTH WIDTH 62 B12, BD12 VB1221, VBD1221 B15, BBCU42, BD15 VB15
CFO - Cabinet Fronts Only - Availability Guide - Most cabinets can be ordered as "Cabinet Fronts Only" (CFO) - Face frames, doors, hinges, and bumpers will be supplied and shipped loose - Doors are pre-drilled for hinge installation - In addition, plastic corner blocks will be supplied for false front installation requirements CABINET W0930 W0936 W0942 W1230 W1236 W1242 W1530 W1536 W1542 W1830 W1836 W1842 W2130 W2136 W2142 W2412 W2418 W2430 W2436 W2442 W2730 W2736 W2742 W3012 W3015 W3018 W3024 W3030 W3036
Notes 64
Notes 65
hdckitchens.