Specification

29
Base Cabinets
BFPO3
BFPO6
- Available in 3" & 6" widths
with matching Filler Strip
- Full extension ball bearing
slides provide stable, smooth
pullout function
- Adjustable shelves with
chrome rails
- Pull-out unit must be installed
between two cabinets or
cabinet and wall*
- Filler strip attached to pull-out
unit after installation
* See page 31 for tip when installing
between a cabinet and a wall
24" Deep Filler Pantry Pullout
3", 6"
21"
30"
17"
Sink Front Angle
SFAF36
CORNER FLOOR
SFA36
FACE FRAME & DOOR
- Angle sink front must be installed between two cabinets
- Frame/door can be installed with hinges on right or left
- Floor support and toe base must be field constructed
- Maximum sink width for this application 25¾"
Wall Corner
33", 36"
9",12"
9",12"
23
3
/
8
"
23
3
/
8
"
21"
34½"
24"
- Two 26" or 28" diameter, pie-cut independently
revolving all wood shelves
- Doors open 170 degrees for easy access
- Clip corner is 1/4" plywood
- SOFT CLOSE DOOR (SCD) OPTION NOT AVAILABLE
33" and 36" Easy Reach Super Suzan
EZR33SS
EZR36SS
SPECIFY
RIGHT or LEFT HINGED
21"
9",
34½"
24"
12"
BPPO9
BPPO12
- Available in 9" & 12" width cabinets
- Full extension ball bearing slides provide stable, smooth
pullout function
- Adjustable shelves with chrome rails
24" Deep Base Pantry Pullout
This assembly requires a drawer base, either 24" or 30" wide -
depending on the size of the built in microwave you purchase
separately.
Assembly requires the onsite removal of the top two drawers
from the cabinet. Consult the manufacturer specications for
cut out dimensions, as additional modication may be required.
Depending on the cut out dimensions the use of a ller (FS30), to
ll the gap between the bottom of the microwave and the drawer.
Consult the manufacturer specications for proper support and
possible use of a trim kit*.
*Trim kit and microwave will be purchased independently from
supplier of your choice.
Built-in Microwave Base Modification