Specification

36
Tall Cabinets
24” Deep Refrigerator Panel with 1 ½” wide Filler
- 1 ½” wide solid wood filler
included
- Panel and filler supplied loose for
field assembly
- Reversible, may be installed left
or right
- 1/2" thick plywood panel finished
with vinyl laminate color matched
to cabinetry face frame
- Filler may be scribed up to 5/8”
RP1.584
RP1.590
RP1.596
1½"
½"
3"
½"
24” Deep Refrigerator Panel with 3” wide Filler
- 3” wide solid wood filler included
- Panel and filler supplied loose for
field assembly
- Reversible, may be installed left
or right
- 1/2" thick plywood panel finished
with vinyl laminate color matched
to cabinetry face frame
- Filler may be scribed up to 5/8”
RP384
RP390
RP396
30” Deep Refrigerator Panel with 1 ½” wide Filler
- 1 ½” wide solid wood filler
included
- Panel and filler supplied loose for
field assembly
- Reversible, may be installed left
or right
- Trimmable in field for 84” and 90”
applications
- 1/2" thick plywood panel finished
with vinyl laminate color matched
to cabinetry face frame
- Filler may be scribed up to 5/8”
RP1.53096
30"
½"
1½"
30"
½"
3"
30” Deep Refrigerator Panel with 3” wide Filler
- 3” wide solid wood filler included
- Panel and filler supplied loose for
field assembly
- Reversible, may be installed left
or right
- Trimmable in field for 84” and 90”
applications
- 1/2" thick plywood panel finished
with vinyl laminate color matched
to cabinetry face frame
- Filler may be scribed up to 5/8”
RP33096
Vertical
Grain
Vertical
Grain
Vertical
Grain
Vertical
Grain
The Universal Oven cabinet will need to
be modified on the job site to fit your
specific appliance. By removing the
drawers and stiles between the drawers
you can achieve an opening height
between 21” and 60”, and a maximum
width of 30”. The height of the upper
doors will not be affected with these
modifications. Your appliance size and
the amount of modification required will
determine if the drawers will be able
to be used. In some instances, the top
drawer may be dropped to the bottom
position, thus allowing a drawer to
remain. Installation and modification of
the cabinet is completed on your job
site, not in the factory. Support for the
appliance is not supplied by the cabinet
company and will need to be determined
based on appliance manufacture
requirement.
Ships from
Factory
Drawer
height
8"
10"
10"
Stiles after
drawers removed
Possible use of
bottom drawer
All drawers
removed
30" Max
width
60" Max
height