Specification

58
Decorative Hardware
- Euro railing pull
- Brushed nickel
DH44-346 - 8" Square Bar Pull
7½" center (196mm)
DH44-348 - 9" Square Bar Pull
8-13/16" center (224mm)
DH44-350
- 13" Square Bar Pull*
12-5/8" center (320mm)
DH44-352
- 19" Square Bar Pull*
18-7/8" center (480mm)
- Brushed steel
DH116-120 - 10" Quadra Pull
5" inside center (128mm)
8-13/16" outside center (224mm)
DH116-122 - 11" Quadra Pull
6-5/16" inside center (160mm)
10-1/16" outside center (256mm)
DH116-126
- 14" Quadra Pull
8-13/16" inside center (224mm)
12-5/8" outside center (320mm)
DH116-134
- 20" Quadra Pull*
15-1/8" inside center (384mm)
18-7/8" outside center (480mm)
DH116-136
- 24" Quadra Pull*
18-7/8" inside center (480mm)
22-11/16" outside center (576mm)
- Brushed nickel
- Features dual
mounting hole options
* Due to the overall length of this hardware, it is not compatible
with drilling template HDWE TEMPLATE-AW.
DESIGN TIP: Make sure to double
check the length of drawer/door to
ensure pull will fit the cabinet
DH45-100 - 6 15/16" Euro Pull
3-13/16" center (96mm)
DH45-102 - 10 3/4" Euro Pull
7-9/16" center (192mm)
DH45-104
- 14 7/8" Euro Pull*
11-3/4" center (298mm)