Use and Care Manual

8
Using the Remote Control (continued)
3
Using the remote control
The operation of the
remote control buttons work
s
the
same as the buttons on the front panel of the
fireplace/heater. Review the Operation section for more
information on the functionality of these buttons.
NOTE:
The remote control
cannot
lock/unlock the flame
and heating function, and it cannot switch between
Fahrenheit and Celsius
.
Care and Maintenance
WARNING:
Always disconnect from the power supply before
cleaning the heater. First turn off the main power. Then remove
the electrical plug from the wall outlet.
WARNING:
Do not use this fireplace insert if any part of it has
been under water. Immediately call a qualified service technician
to inspect the firebox and replace any part of the electrical
system which has been under water.
The blower motor and flame motor are pre-lubricated for a durable using time and need no further lubrication or maintenance. To remove any
accumulation of dust or fluff the soft brush attachment of a vacuum cleaner should occasionally be used to clean the outlet grille of the fan heater.
Use a soft, clean cloth that will not scratch the surface when dusting.
Use a clean soft cloth dampened with warm water to clean the fireplace surface. DO NOT use household or abrasive cleaners, as these
products may damage the surface.
When cleaning the glass viewing screen use a non-abrasive damp cloth with liquid cleaner or soft soap if necessary; DO NOT use cleaning
powders or any other substance with abrasives since these substances will scratch glass.
Under no circumstances should this product be operated with a broken or chipped glass panel.
Do not strike or slam the glass.
In the event that your appliance is stained or otherwise damaged during use, we recommend that you call a professional to repair your
furniture.
When not in use please unplug the cord from the outlet to prevent any damage or accidental plug of the cord.
Heater Up
Main Power
Heater Control
Flames Control
Timer Control
Heater Down