Installation Guide
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Description of System Components
- Chapter 3: System Configuration and Sizing
- Chapter 4: Installation Practices
- Chapter 5: Sizing/Capacity Tables
8
Part Number
Size
(IPS)
SDR
Dimensions (in)
Weight
(lbs)
S D H G L
250142
½" 9.3 0.47 1.81 2.76 1.10 5.51 0.29
250143
¾" 11 0.51 2.13 3.19 1.54 6.34 0.49
250144
1" 11 0.63 2.68 3.78 1.69 7.44 0.86
250146
1¼" 10 0.79 3.23 4.41 1.89 8.78 1.46
250145
1¼" 11 0.79 3.23 4.41 1.89 8.78 1.46
250168
1½" 11 0.83 3.78 4.88 2.17 9.65 2.16
250147
2" 11 0.94 4.45 5.59 2.72 11.1 3.33
Check homeflexunderground.com for up-to-date product listings.
2.3 Conversion Fittings
• Converts between Steel and MDPE Gas Pipe
• Complies with ASTM F1973 for use with ASTM D2513 Gas Pipe
• Suitable for Natural Gas or LP Gas
• Maximum Operating Pressure: 125 PSIG
• Operating Temperature Range: -20°F - 180°F
Part No. Description
SDR
HOME-FLEX
TM
Fitting
Male Pipe Threads
221076
½" IPS to ½" MIP
9.3
221077
¾" IPS to ¾" MIP
11
221078
1" IPS to 1" MIP
11
Conversion Fitting Dimensional Information
Part Number
Size
(IPS)
SDR
Dimensions (in)
Weight
(lbs)
S D L L1
221076
½" 9.3 0.67 1.81 3.94 3.33 0.23
221077
¾" 11 0.81 2.13 4.41 3.74 0.34
221078
1" 11 0.87 2.66 5.43 4.13 0.56