Installation Guide
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Description of System Components
- Chapter 3: System Configuration and Sizing
- Chapter 4: Installation Practices
- Chapter 5: Sizing/Capacity Tables
4
Chapter 2: Description of System Components
2.1 Gas Pipe
Application Information
For use in direct burial Natural Gas and Liqueed Petroleum (LP) Gas applications with
Polyethylene (PE) gas pipelines.
Technical Data
Materials
Pipe: Polyethylene (PE 2406/2708)
Pressure Ratings Temperature Ratings
Max Operating Pressure: 80 PSIG Operating Temperature Range: 0°F - 140°F
Codes Standards
NFPA 54/ANSI Z223.1
NFPA 58
International Fuel Gas Code
Uniform Plumbing Code
ASTM D2513
NSF/ANSI 14 Certied
Dimensional Information
Part Series
Size
(IPS)
SDR
Dimensions (in)
Min Bend
Radius
Av. OD Approx. ID Min Wall Thick
19-0593XXX ½" 9.3 0.840 0.660 0.090 17.00"
19-0711XXX ¾" 11 1.050 0.860 0.095 26.25"
19-1011XXX 1" 11 1.315 1.075 0.120 30.00"
19-1211XXX 1¼" 11 1.660 1.358 0.151 41.50"
19-1511XXX 1½" 11 1.900 1.554 0.173 47.50"
19-2011XXX 2" 11 2.375 1.943 0.216 59.40"
Part Number Listing
Part No. Size (IPS) SDR Length
19-0593100 ½" 9.3 100'
19-0593250 ½" 9.3 250'
19-0593500 ½" 9.3 500'
19-0711100 ¾" 11 100'
19-0711250 ¾" 11 250'
19-0711500 ¾" 11 500'
19-1011100 1" 11 100'
19-1011250 1" 11 250'
19-1011500 1" 11 500'