Instructions / Assembly

ManualsBrandsHome Heritage ManualsArtificial Christmas Trees5 ft. Flat Back Half Christmas Tree for Wall with White LED Lights

3. Please identify all sections before assembling.

4. Assemble the tree from the bottom to the top. Start with the bottom section and remove protective

cap before inserting into the assembled stand. Make sure the pole is firmly inserted and secured into

the stand.

5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.

6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all

wires are free of branch hinges.

7. Just plug the adaptor into the wall outlet(see Fig. B). Your entire tree should now be lit. If some bulbs

do not light or flickers, search for any loose plugs and/or broken, loose or missing bulbs. Replace bulbs

promptly in order to maintain the performance and life expectancy of your pre-lit tree.

8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from

the pole and fan out one to the right, one to the left and one at the center of the main stem. (See Fig. C)

1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.

2. Assemble the tree stand and place on a level surface. (See Fig. A)

Congratulations on purchasing your new tree from

Polygroup®!

Carefully follow the instructions below on how to quickly and easily set up your new tree.

TREE ASSEMBLY INSTRUCTIONS

Top view

Side view

Fig. C

MODEL #: TG5000GHDL00

*Electrical Rating For The Tree

(For Indoor Use Only)

Input: 120V, 60Hz, 0.08A Max.

Output: 28V DC 0.107A

Fig. B - Tree and Light Assembly

MADE IN CHINA

ASSEMBLY INSTRUCTIONS

Fig. A - Tree Stand Assembly

Pull apart the legs of the stand so that they

are snapped into an x-shape, place the tree

stand on a level surface.

To close the stand, press the metal button

and fold the legs together.

Click

Adaptor

To Be Plugged

Into Wall

Outlet

Insert Green

Label Extension

Cord into Adaptor

Section 1

Tree top

Foot Pedal

on/off Switch

Insert Red Label

Plugs Into Red

Labeled Extension Cord

Summary of content (3 pages)

PAGE 1
TREE ASSEMBLY INSTRUCTIONS Congratulations on purchasing your new tree from Polygroup®! Carefully follow the instructions below on how to quickly and easily set up your new tree. 1. Before you start to assemble your tree, choose an appropriate location near a wall outlet. 2. Assemble the tree stand and place on a level surface. (See Fig. A) Fig. A - Tree Stand Assembly Pull apart the legs of the stand so that they are snapped into an x-shape, place the tree stand on a level surface.
PAGE 2
9. After shaping the entire tree following the previous step, slightly upsweep all branch tips for a uniform look. Shift branches to fill any gaps. Your Christmas tree is now complete and ready to be decorated. STORAGE INSTRUCTIONS TROUBLESHOOTING TIPS For Pre-lit Trees, If The Tree Does Not Illuminate 1. Please check to make sure that all plugs are properly connected and adaptor is plugged into the wall outlet. (If the tree comes with a foot pedal, try stepping on the on/off button). 2.
PAGE 3
USER SERVICING INSTRUCTIONS Lamp Replacement Step 1. Unplug from power source, by pulling out the adaptor itself - do not pull on the power cord. Step 2. Lift up the lamp lock tab, and pull the bulb and its plastic base straight out from the lampholder. Step 3. Replace with a new spare LED lamp (included). (For reference only) CAUTION: CUSTOMER SERVICE FOR CHRISTMAS TREES For any questions, assistance, or missing parts, Do Not Return To Place Of Purchase.