Installation Guide

www.homelegend.com
DOC: HWH-V001
10 | Page
Pre-install Activities
Subfloor should be in a clean condition.
Inspect plank quality and grading.
Lay out several cartons.
Arrange planks to ensure even color distribution.
A random pattern is recommended.
Minimum stagger point should be longer then the width of the plank.
.
Remove existing base, shoe molding or threshold carefully. They can be used to cover the 3/4 expansion gap left around the
edge of the room.
Undercut doors and casings using a handsaw laid flat on a piece of scrap flooring. This eliminates difficult scribe cuts.
Always use protective foot/pad and proper height adapter plate on the fastening machine to prevent face damage, mallet
damage, and edge bruising.
Pre-install Activities