Instructions / Assembly

Customer Service Hotline [phone]-PURE
Page 2
Home Master® Reverse Osmosis System—Owners Manual
Home Master
®
RO Contents:
1 Assembled RO filter cluster
1 Storage tank
1 Tank valve
1 Drain saddle & gasket
1 Roll Teflon tape
1 Mounting clips & screws
1 Chrome long reach RO faucet (or custom faucet); faucet adapter fitting and
hardware.
1 EZ adapter—feed water adapter 3/8” mc x 3/8” fc x 1/4” tube
General System Specifications
 Feed water: PSI 40 - 100 PSI
 Feed water Temperature: 40˚ - 100˚(F)
 Max. Total Dissolved Solids (TDS): 2000 ppm
 Max. Hardness: 10 gpg
 pH limits: 4 - 10
Maintenance Schedule (see page 11)
Replace filters — ANNUALLY
Sanitize tank & Check tank pressure (7 psi) — ANNUALLY
Inspect tubing and fittings for wear — ANNUALLY
Replace Membrane — 3-5 year replacement
—VIDEO INSTALLATION INSTRUCTIONS AVAILABLE ONLINE—
www.theperfectwater.com/Installation-Instructions.html
System Location
The Home Master
®
RO may be installed under a sink, or in a basement within 10’ feet of the RO
sink faucet as long as the Home Master
®
RO is not subjected to freezing temperatures (please
see FAQs page for more basement location details). The Home Master
®
RO should be mounted
vertically where the drain line out is at the bottom. Mount the reserve tank on a sturdy shelf,
because it will weigh over thirty pounds when full.
Tools Required
Safety glasses Towels
Phillips screwdriver Scissors
Medium Crescent wrench Medium pliers
Felt tip pen or marker Unscented (regular) bleach
Variable speed corded power drill (3/8” for the sink hole, ¼” for the remainder)
¼” metal drill bit w/ cobalt tip
½” metal drill bit w/ cobalt tip (not required if sink has a pre-drilled hole)
½” masonry drill bit (not required if sink has a pre-drilled hole, or if sink is not porcelain)
Customer Service Hotline [phone]-PURE
Page 15
Home Master® Reverse Osmosis System—Owners Manual