Instructions / Assembly

Curt Manufacturing Inc., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing Inc., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing Inc.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
CABLE DAMPING
TOWELS OR JACKETS.
TOW HOOK OR
RECOVERY EYE
RETURN CABLE
SNATCH BLOCK
TREE SAVER STRAP
SOLID OBJECT
FRONT MOUNTED ACCESSORIES
1) Do not exceed front axle Gross Weight Rating (GAWR). Consult owners manual or specification plate located on
driver's door frame. Measure gross front axle weight by placing front wheels of loaded vehicle on a scale.
WARNING: Exceeding GAWR may overload the front axle and/or suspension. This could result in accident,
property damage and personal injury.
2) Reposition front mounted license plate if obstructed.
3) Do not obstruct vehicle lights.
4) Allow free air flow into grille opening.
5) Rear wheel traction may be reduced. This could effect handling. Reduce speed and drive with caution.
6) Accessories extend front of vehicle. This may reduce approach angle. Use caution when parking and maneuvering.
7) Do not obstruct driver view.
VEHICLE RECOVERY AND WINCHING TIPS
1) Use OEM tow hooks, recovery eyes or a clevis mount for attachment of a tow strap or winch cable.
WARNING: NEVER use a ball and/or ball mount as an anchor point for tow strap or winch cable.
Severe personal injury or death could result.
2) Observe winch manufacturer's recommendations, cautions and warnings.
3) Attach return cable to tow hook or recovery eye when using a snatch block (See figure 1).
CAUTION: Do not attach return cable to winch mount. This may overload winch mount and/or front mounted receiver.
RATING
For Maximum line pull rating, winch cable must not exceed:
- 15 degree angle up or down from horizontal (See Figure 2).
- 45 degree angle left or right from straight ahead (See Figure 3).
CAUTION: Exceeding the maximum line pull rating may over load winch, winch mount, and/or front mounted receiver.
FIGURE 2
FIGURE 3
FIGURE 1
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY ***.
31019
15°
15°
45°
45°
FORD RANGER, MAZDA B-SERIES TRUCKS
(EXCLUDING MODELS WITH FRONT CROSS MEMBER)