Owner's manual

ManualsBrandsHome Styles ManualsTelevisions5530-10

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the wood parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure a

completed product as it was designed.

88 5530 101

Naples

Entertainment Credenza

Part List

Back Panel

2 pcs.

Base

1 pc.

Back Support

1 pc.

Top

1 pc.

Tools required for assembly : Phillips screwdriver

Hardware List

For assembly see instructions in carton 88 5530 102

Cam Lock

28 pcs.(+6 extra)

Cam Lock Screw

28 pcs.(+2 extra)

Adjustable Pin

20 pcs.(+1 extra)

Pull Handle

4 pcs.

Machine Screw

4 pcs.

Wood Screw

for Magnet

8 pcs.(+1 extra)

Magnet

4 pcs.

Plinth

1 pc.

Back Panel

1 pc.

Wood Screw

for Back Panel

12 pcs.(+1 extra)

Wood Screw

for Wood Block

12 pcs.(+1 extra)

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Summary of content (5 pages)

PAGE 1
88 5530 101 Naples Entertainment Credenza IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List A. Top 1 pc. J. Back Panel 1 pc. H. Plinth 1 pc. I. Base 1 pc. K. Back Panel 2 pcs. R.
PAGE 2
88 5530 102 Naples Entertainment Credenza IMPORTANT NOTE Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the wood parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List (in this carton) E. Middle Panel 1 pc. D. Middle Panel 1 pc. B. Side Panel 1 pc. L. Shelf 1 pc. C.
PAGE 3
Assembly Instructions 2/4 STEP 1 Cam Lock Screw Attach 2X Magnets to Top (A) by using Wood Screws into the pre-drilled holes (See figure 1). Wood Screw T Magnet A Attach 2X Wood Blocks (T) to Top (A) by using Wood Screws for Wood Block into the pre-drilled holes. Insert Cam Lock Screws into Wood Screw for Wood Block the pre-drilled holes of Top (A). Wood Block T B C D E (Figure 1) H STEP 2 Attach 2X Wood Blocks (T) to Base (I) by using Wood Screws for Wood Block into the pre-drilled holes.
PAGE 4
Assembly Instructions 3/4 Cam Lock C H I B Cam Lock Screws S R STEP 4 Attach Base (I) to the unit with Cam Locks. Put 3X Cam Lock Screws into the pre-drelled holes of Base (I) as shown, then attach Back Support (R) to Base (I) with Cam Locks and attach Side Panel (B) and (C), Plinth (H) to the unit with Cam Locks. Tighten up Leg (S) in the pre-drilled hole of unit as shown. A Adjustable Pin Cam Lock K (Figure 3) J M M STEP 5 Slide Back Panels (J) and (K) into place.
PAGE 5
Assembly Instructions 4/4 P Q (Figure 4) N (Figure 5) STEP 6 O Attach Doors (N), (O), (P) and (Q) by sliding the door lift hinges into the side panels lift hinges. (See figure 4) Assemble Pull Handles to Doors with Machine Screws. (See figure 5) (Figure 6) STEP 7 Insert 12X Wood Screws from the back of the unit, tighten up all the Wood Screws. (See figure 6) Note: Please make sure unit is level before tightening these screws.