Instructions / Assembly

Assembly Instructions
STEP 1
STEP 2
STEP 3
Figure 1
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
Turn the table to its’ upright position.
To level the table, adjust the adjustable
levelers on the bottom of legs.
(See figure 2)
Figure 2
B
B
B
B
C
Attach Legs (B) to Stretcher (C)
with Flat Washers, Spring Washers,
Nuts and Nut Caps.
Nut Cap
Nut
Flat Washer
Spring Washer
A
Place Top (A)
upside down on a soft cloth.
Insert all Bolts into the pre-drilled holes
of Top (A). (See figure 1)
Attach unit from Step 1 to Top (A)
with Flat Washers, Spring Washers,
Nuts and Nut Caps.
Nut Cap
Nut
Flat Washer
Spring Washer
Bolt