Installation Guide

Part List

Home Styles Consumer Assistance: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com, 888-680-7460, 877-831-0319

Hardware List

88 5560 32

Dining Table

Tools required for assembly : Slotted screwdriver Tools recommended for assembly : Level

Key Wrench

1 Pc.

M8x40

Bolt

4 Pcs.(+1 extra)

Flat Washer

12 Pcs.(+1 extra)

Nut

12 Pcs.(+1 extra)

Nut Cap

12 Pcs.(+1 extra)

Cover

1 Pc.

Spring Washer

12 Pcs.(+1 extra)

To p

1 Pc.

Leg

4 Pcs.

Side Frame

4 Pcs.

IMPORTANT NOTE

This product is made of sturdy, high quality aluminum

and will provide years of enjoyment. Do not use power tools

to assemble and only tighten bolts until they are snug.

Over tightening can cause damage to the aluminum.

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damages occuring to the parts.

We have taken great care in the design of this product and

request that you carefully and strictly follow our assembly

instructions to ensure a completed product as it was designed.

PAGE 1
88 5560 32 Dining Table IMPORTANT NOTE This product is made of sturdy, high quality aluminum and will provide years of enjoyment. Do not use power tools to assemble and only tighten bolts until they are snug. Over tightening can cause damage to the aluminum. Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damages occuring to the parts.
PAGE 2
Assembly Instructions 2 /2 IMPORTANT * Please keep Key Wrench in a safe place as you may need to tighten up the Nuts in the future. * Use a soft cloth between these parts and the f oor. * Do not use power tools to assembly and do not overtighten the bolts and nuts. * Do not tighten up all the bolts and nuts until each part is properly assembled. * After assembly item must be level to work properly. Use the included adjustable levelers to level.