Instructions / Assembly

(Figure 3)
STEP 3
Insert wood screws (6X)short
into the pre-drilled holes in L5,
tighten screws. (See Figure 3)
STEP 4
Attach hardware pulls
with machine screws.
(See Figure 4)
STEP 2
Slide L5 into the grooves in L3
and L4. Be sure to push L5 all
the way forward so it meets L1.
(See Figure 2)
Tighten all screws used in drawer assembly.
(Figure 1)
(Figure 2)
MAKE SURE ROLLER
IS ON THE BACK
L2
L3
L4
L5
L1
Drawer L
Part List
(Figure 4)
STEP1
Attach L1 to L3 and L4, using
a andPhillips screwdriver
wood screws (4X),long
tighten halfway.
Attach L2 to L3 and L4 using
wood screws (4X),long
tighten halfway. (See Figure 1)
L3
L4
L1
L2
L1
L3
L4
L5
L2
L1.
Front Part
2 pcs.
L5.
Base Part
2 pcs.
L2.
Back Part
2 pcs.
L3.
Side Part
2 pcs.
L4.
Side Part
2 pcs.
Assembly Instructions 6/6