Instructions / Assembly

Assembly Instructions 2/2
Figure 1
Figure 2
IMPORTANT
* Please keep Key Wrench in a safe place as you may need to tighten up the Nuts in the future.
* Use a soft cloth between these parts and the floor.
* Do not use power tools to assemble and do not over tighten the bolts and nuts.
* Do not tighten all the bolts and nuts until each part is properly assembled.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
STEP 2
Turn the unit over to its’ upright position.
Cover the umbrella hole with Cover.
To level the unit, adjust the adjustable levelers
on the bottom of the legs. (See Figure 2)
Cover
A
B
B
B
B
Bolt
Flat Washer
STEP 1
Place Top (A) upside down on a soft cloth.
Attach Legs (B) to Top (A) with Flat Washers,
Spring Washers and Bolts, tightening the
bolts only half way.
(See Figure 1)
Tighten all Bolts.
Spring Washer