Technical Specifications

Do not make any deductions or allowances.
Blinds/Shades are mounted inside the window casing/frame.
Use a metal measuring tape (cloth tapes may stretch).
Measure the width in the 3 different places
shown for narrowest width.
Measure the Height from the top of the window opening
to the top of the window sill in the 3 different places
shown for the smallest height.
(Do not order blinds/shades shorter than your window opening.)
Measure exactly to the nearest 1/8 in.
Depth measurement must exclude any locks, levers or handles.
Blinds/Shades are mounted outside the
window casing/frame.
Use a metal measuring tape (cloth tapes may stretch).
Measure the exact Width and Height of the
entire area to be covered.
For added light control and privacy,
we recommend you add 1 ½ " on each side.
(approximately 3" for overall width and 3” for overall height)
Measure exactly to the nearest 1/8 in.
Select the width and height closest to the area
you want to cover.
Do not order blinds/shades
less than the area you want to be covered.
add Min. 1
1/2” to
each side
Recommended to add 3” overlap
add Min. 1
1/2” to
each side