Downloadable Instruction Book

6 7

Operating Instructions

Turning the Unit On

• Take the air cleaner out of the box and remove the clear protective plastic bag.

• Place the air cleaner on a firm level surface.

• Before turning the air cleaner ON, you need to check that the filter is firmly in

place and did not become loose during shipping. You may also choose to install

the optional odor reducing pre-filter.

NOTE: This appliance has a polarized plug (one blade is wider than

the other). To reduce the risk of shock, this plug is intended to fit only

one way in a polarized outlet. If the plug does not fit fully in the outlet,

reverse the plug. If it still does not fit, contact a qualified electrician.

DO NOT attempt to defeat this safety feature. To do so could result in

an electric shock hazard.

Control Panel

NOTE: The Clean/Reset Filter Indicator MUST be pressed to reset the

indicator after you have cleaned and replaced the filter.

Fig. 1

Clean Filter

Fig. 2

Clean Filter

Fig. 3

1. To check True HEPA filter, open the

front grill cover by pulling on the tabs

on either side of the top of the grill

cover. Fig. 1

2. Open the grill cover outward until the

tabs at the bottom of the grill cover

easily slide away from the unit. Fig. 2

3. The True HEPA filter will be resting

inside the unit. Make sure that the

filter is firmly seated inside of the unit.

CLEAN FILTER

1 2 3

Clean/Reset Filter

Indicator Button

Fan Speed Indicator

Power ON/OFF Control

Timer Interval Selection

Timer Indicator

Fan Speed Selection

(Low, Medium, High)

Remote

Control