Downloadable Instruction Book

6 7
Operating Instructions
Turning the Unit On
• Take the air cleaner out of the box and remove the clear protective plastic bag.
• Place the air cleaner on a firm level surface.
• Before turning the air cleaner ON, you need to check that the filters are firmly in
place and did not become loose during shipping.
NOTE: This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of shock, this plug is intended to fit only
one way in a polarized outlet. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician.
DO NOT attempt to defeat this safety feature. To do so could result in
an electric shock hazard.
Control Panel
NOTE: The Clean/Reset Filter Indicator MUST be pressed to reset the
indicator after you have cleaned and replaced the filter.
Fig. 1
Fig. 2
Fig. 3
1. To check filter, open the front grill by
pulling on the tabs on either side of
the top of the grill plate. Fig. 1
2. Open the plate outward until the tabs
at the bottom of the grill plate easily
slide away from the unit. Fig. 2
3. The HEPA filter will be resting
inside the unit. Make sure that the filter
is firmly seated inside of the unit. Fig. 3
CLEAN FILTER
1 2 3
Clean/Reset Filter Indicator Button
Fan Speed Selection (Low/Medium/High)
Power ON/OFF Control