HX-EP510 manual HoMedics, Inc.
Index 1. Specifications of the Product 1.1 Environmental Specifications 1.2 Mechanical Specifications 1.3 Cable Specifications 1.4 Electrical Specifications 1.5 Acoustic Specifications 2. Product drawing 2.1 Outside View 3.
1.Specifications of the products 1.1 Environmental Specifications All materials must be complied with ROHS, Reach, and California 65 environmental standard 1.2 Mechanical Specifications 1.2.1 Dimension：14.5mm*23mm*26.5mm 1.2.2 Weight： 15.3g（Ear buds only） 1.2.3 Charge Port：Micro USB 1.2.4 Main Board：Multiple functional button. MFB: Power/off/pair/Vol+/Vol-/Play/pause/Call ect. 1.2.5 Testing detail please refer to item 6 (Reliability testing) 1.3 Cable Specifications 1.3.1 Cable: Flat reflecting cable, 4.
Power On： Press and hold MFB 1.5s until the light turns blue, if there is already a device connected, automatically connect the previous device, otherwise enter pairing mode, the red and blue light blinks alternately. Power Off: Option1: When device is on, press and hold MFB 4 seconds, the LED will flash red for 1 second, Bluetooth Ear bud will shut down. Option 2: When the two ear cups touch together, it will shut down. Pair: 1.
Second Call: When there’s a second incoming call, press "play" button access the second call, current call will be remained, and then press and hold the "Play" button 1second to switch between the second call and the previous call, short press "play" button to end the current call. Volume Up: Short press the up button once quickly. Your earbuds will sound a high pitched tone when you have reached their maximum volume. Volume Down: Short press the down button once quickly.
2 Product Drawing： 2.
3 FCC & IC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
