Downloadable Instruction Book

5
INDICATIONS FOR USE
Arm & Leg Pain
BATTERY AND GEL PAD ASSEMBLY
5. Remove blue film
from the gel pads.
6. Place exposed side
onto the unit and press
firmly with fingertips to
adhere.
7. Remove clear film from
the back of the gel,
pulling slowly to ensure
the gel stays in place.
8. Your unit is now ready to
place where it hurts. Note:
Clean skin area before applying.
3. Insert battery provided
“+” side up (CR2032
Lithium battery only).
2. Flip open battery cover
with a pin.
1. Use a coin or small device
to turn the battery door to
the OPEN position.
4. Close and lock battery
cover.
Place this device where you appear
to have pain. For optimum result,
move device to the other spot
indicated on the image on the left,
after finishing 20 minute cycle.