Downloadable Instruction Book

HOW TO OPERATE

1. Press and hold + button for 3 seconds to power the unit ON and listen for the

beep. Note: The unit will not operate if it is not in contact with your skin.

2. Press + button again to activate device. Continue to press the + button until you

feel the sensation of the impulses.

3. Use +/- button to adjust intensity level, note there are 15 levels.

4. The device automatically powers off after 20 minutes, or press and hold - button

for 3 seconds to power OFF.

Note:

• Battery will need to be replaced if the device no longer makes a beep sound

or sends any electric impulses. Please check the troubleshooting section for

additional issues with beeping.

• Device only works when in contact with the skin. When the device is not in contact

with the skin, the device will not activate the impulses.

• After use, always place the device into the provided carry case protecting the gel

pad after use.

• Smart Contact Detection automatically sends audible alerts when the gel pads are

not securely fixed to the skin.

• When power is on, intensity level is set to 0 for safety purposes. Press the

+ button again to activate and increase intensity.

Press 3 sec to power ON;

increase intensity

Press 3 sec to power OFF;

decrease intensity