Use and Care Guide

BLUETOOTH
®
CONNECTION, CONTINUED
Like any amazing couple, this one starts with a connection — one between
your device and the speaker’s Bluetooth. Here’s how it works:
1. Make sure the smartphone, tablet, or computer you’re using with the
speaker has Bluetooth.
2. Turn on the speaker (press and hold the power button for 3 seconds) and
look for the little blinking light.
3. Do whatever your device needs you to do on its end.
4. Look for JAM Xterior in your device’s Bluetooth list or click YES.
5. Now hit PLAY on your speaker and crank it up — or down if you’re lame.
The device and Bluetooth will find each other every time, as long as the
speaker is set to Bluetooth and your device’s Bluetooth is, you know, on.
If you’re connecting to a computer, you may have some extra steps on
that end. You’ll have to get that information from the computer company.
Depending on your device, you may be prompted to enter a pairing
code. If prompted, enter “0000” as the code.
To disable pairing of an existing device and pair a new device, press and
hold the + and - buttons together for 5 seconds to activate pairing
mode.
Note: If you turn on your Xterior but haven’t started the party yet, it will
automatically power off after 2 minutes of unpaired inactivity.
Note: Once you've paired, if you pause the party for 15 minutes or more,
the JAM Xterior will automatically shut off to preserve battery power.
2m
15m
TRULY RUGGED CONSTRUCTION
The smart folks who made this speaker designed it to keep the party going
through just about anything (they call it IP67). This means the Xterior is dirt
proof, drop proof, and submersible in water up to one meter for 30 minutes.
You can also attach it to a bike mount to listen while you ride. But those
designers aren’t miracle workers. Doing something like dropping your
speaker from Mount Everest or taking it deep sea diving will damage your
speaker and prevent it from emitting the incredible sounds it is made to.
Always keep the side flap flush with the speaker when you are using it near
water, or it will be damaged.
HELLO? SPEAKERPHONE? YES!
When friends call asking to join the party — and you know they will — answer the phone without disconnecting from your JAM Xterior.
Yes, that’s right. Your speaker is a speakerphone, too. How amazing is that? Here’s how it works:
1. Make sure your phone and speaker are connected through Bluetooth.
2. Answering and ending a call works the same way: simply click the PLAY/PAUSE button on your Xterior.
3. If you’d rather not talk, hold down the PLAY/PAUSE button on your Xterior for 3 seconds to ignore the call.
THE COOLEST PART: The Xterior knows when a call is coming in and pauses the music before ringing. When you hang up, the music
starts where it left off — and so does the party. If it’s you making the call, just start dialing from your phone, and the Xterior automati-
cally does its hands-free thing. Isn’t it refreshing to know your speaker totally gets you?
Check out the chart below for a complete guide on handling calls with your Xterior.
COMING CLEAN
A soft, damp towel is all you need to
clean off your speaker. Using harsh
cleaners or anything else only starts
messing with the mechanics inside.
So, yeah, don’t do it.
HOOKING UP OLD-SCHOOL AUDIO, JACK
1. Plug one end of the cord into the speaker
and the other into the headphone jack on
your device.
2. Turn on the speaker.
3. Hit PLAY on your device and crank it up —
or down if you’re lame.
You’ll have to play and pause the music from
your device, not your speaker. No problem.
You’re there anyway, right?
Auxiliary cable not included.
Situation
Short Press Play/Pause Button Long Press Play/Pause Button
1
st
Incoming call
2
nd
Incoming call
On call
Both calls active
Pick up call
End call
Call 1 on hold, pick up call 2
Hang up call 1, switch to call 2
Reject call
Move call from speaker to device
Reject call 2
Switch between 1
st
call and 2
nd
call