Distributed by ® Shiatsu Massage Chair M ake A omen tN eT as Register ow Pl e Traveling Shiatsu Mechanism Your Product At: www.homedics.com/register Your valuable input regarding this product will help us create the products you will want in the future.
® IMPORTANT SAFEGUARDS WHEN USING ELECTRICAL PRODUCTS, ESPECIALLY WHEN CHILDREN ARE PRESENT, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING: READ ALL INSTRUCTIONS BEFORE USING DANGER - TO REDUCE THE RISK OF ELECTRIC SHOCK: • ALWAYS unplug the appliance from the electrical outlet immediately after using and before cleaning. • DO NOT reach for an appliance that has fallen into water. Unplug it immediately. • DO NOT use while bathing or showering.
Instructions Assembly Instructions INVENTORY OF PARTS: A. Seat Back (x1) B. 6mm Allen Wrench (x1) C. Armrests (x2) D. Screw Covers (x8) E. 8m x 25mm Screws (x12) F. Seat Cushion (x1) G. Seat Base Mechansim (x1) H. Plastic Cone Cover (x1) I. Star Base (x1) J. Rolling Castors (x5) K. Pneumatic Cylinder (x1) 1. Place the star base face down and firmly press the rolling castors into place. Figure 2A Figure 1 Figure 2B 2.
3. Attach the seat base mechanism to the underside of the seat cushion using the included Allen wrench and 4 of the screws. Make sure the arrow on the seat base mechanism is pointing toward the front edge of the seat cushion (label on seat cushion). 5. Attach the armrests (labeled as R and L for right and left sides) onto the seat cushion using the included Allen wrench and 4 of the screws (2 on each side). DO NOT TIGHTEN THE SCREWS COMPLETELY. Figure 4 Figure 6 4.
Massage Cushion and Hand Control Instructions 7. Attach the seat back onto the armrests so it is properly aligned with the seat cushion using the included Allen wrench and the remaining 4 screws (2 on each side). Power On/Off Note: Heat only works with massage function activated To turn the massage function on, press the power button. The corresponding LED will illuminate to indicate power on. To turn the massage function off, press the power button again.
Shiatsu Massage Chair Traveling Shiatsu Mechanism Massage Program Buttons Direct massage to specific areas: lower back, upper back or full back. Press the button for your desired program and the corresponding L.E.D. will illuminate. To deselect an area(s), simply push the button again and the corresponding L.E.D. light will turn off. Demo Button For a brief demonstration of the features of the Traveling Shiatsu Office Chair, press the demo button. The unit will complete one cycle of each massage style.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
Troubleshooting Limited Warranty Problem Probable Cause(s) Suggested Solution Massage action does not start No massage function was pressed. Press one of the massage function buttons to start manual or programmed massage. The power cord is not plugged in. Plug the power cord into a 120-volt AC outlet. The power button on the chair is not turned on. Press the power button. The correct massage function button was not pressed.
Distributed by ® ® ©2010 HoMedics, Inc. and its affiliated companies, all rights reserved. HoMedics® is a registered trademark of HoMedics Inc. and its affiliated companies. All rights reserved.
® PRECAUCIONES IMPORTANTES • Nunca haga funcionar el artefacto con las aberturas de aire bloqueadas. Mantenga las aberturas de aire libres de pelusas, cabellos y similares. • Utilice con cuidado las superficies calientes. Pueden causar quemaduras graves. No use sobre áreas insensibles de la piel o si tiene mala circulación. El uso del calor sin supervisión por parte de niños o personas con incapacidades puede resultar peligroso. • No lo use en exteriores.
Instrucciones Instrucciones de Ensamblaje INVENTARIO DE PIEZAS: A. Respaldo (x1) B. Llave Allen de 6mm (x1) C. Brazos (x2) D. Cubiertas para tornillos (x8) E. Tornillos de 8mm x 25mm (x12) F. Almohadón para el asiento (x1) G. H. I. J. K. 1. Coloque la base en forma de estrella boca abajo y presione firmemente las ruedas para colocarlas en su lugar.
3. Sujete el mecanismo de la base del asiento a la parte inferior del almohadón del asiento usando la llave Allen que se incluye y 4 de los tornillos. Asegúrese de que la flecha del mecanismo de la base del asiento esté apuntando hacia el borde delantero del almohadón del asiento (etiqueta en el almohadón del asiento). 5. Coloque los brazos (etiquetados con R para el lado derecho y L para el lado izquierdo) en el almohadón del asiento usando la llave Allen incluida y 4 de los tornillos (2 en cada lado).
Instrucciones del almohadón masajeador y del control manual 7. Coloque el respaldo del asiento contra los brazos de forma que esté correctamente alineado con el almohadón del asiento usando la llave Allen incluida y los 4 tornillos restantes (2 en cada lado). Botón ON/OFF (encendido/apagado) Atención: El calor funciona sólo cuando la función de masaje es activada Para encender las funciones de masaje, presione el botón POWER (energía).
Sillón masajeador Shiatsu Mecanismo Shiatsu móvil Botones Programs de masaje Masaje directo en áreas específicas: zona lumbar, parte superior de la espalda o espalda completa. Personalice su masaje eligiendo un área específica o cualquier combinación de áreas. Presione el botón para el programa deseado y se iluminará el LED correspondiente. Para anular la selección, simplemente vuelva a presionar el botón y las luces LED correspondientes se apagarán.
Este dispositivo cumple con la sección 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). El funcionamiento está sujeto a las siguientes dos condiciones: (1) este dispositivo no puede causar interferencias nocivas y (2) este dispositivo debe aceptar cualquier interferencia que reciba, inclusive la interferencia que pueda causar un funcionamiento no deseado.
Diagnóstico y resolución de problemas Problema Causa(s) probable(s) Solución sugerida La acción masajeadora no comienza. No se presionó ningún botón de función masajeadora. Presione uno de los botones de función masajeadora para comenzar un masaje manual o programado. El cable de corriente no está enchufado. Enchufe el cable de corriente en un tomacorriente de 120 voltios de CA. El botón de encendido de la silla no está activada. Pulse el botón de encendido.
® HoMedics Service Center 1.800.466.3342 8:30 – 5:00 p.m. (hora del ESTE ) de lunes a viernes Dirección postal: HoMedics Service Center Dept. 168 3000 Pontiac Trail Commerce Township, MI 48390 Correo electrónico: cservice@homedics.com GARANTÍA LIMITADA POR DOS AÑOS HoMedics vende sus productos con la intención de que no tengan defectos de fabricación ni de mano de obra por un plazo de dos años a partir de la fecha de compra original, con las siguientes excepciones.