User Manual

4. Clean the transducer/ultrasonic

membrane with a 50/50 mix of white

vinegar and water on a cotton swab.

Wipe off with a damp cotton swab.

NEVER touch the transducer/ultrasonic

membrane with your fingers; the natural

oils in the skin can damage the surface.

NEVER submerge the base in water or any

other liquid.

5. After cleaning,

reassemble the

humidifier, fill with

water, plug in, and

turn on.

6. Press and hold the clean

indicator/reset button for

3 seconds, until the clean

indicator turns off.

CLEANING AND CARE

CAUTION: Before cleaning the unit, turn power off and unplug unit from the outlet.

CLEANING THE TRANSDUCER/ULTRASONIC MEMBRANE

The transducer/ultrasonic membrane must be cleaned to remove water mineral deposits when the clean

indicator/reset button illuminates red. Failure to do so may cause reduced or no mist output.

1. Remove the tank cover

and set aside.

2. Remove the tank and pour out

any water remaining in the tank.

3. Twist as indicated to remove the

water reservoir from the bottom

of the tank and pour out any

remaining water.