operation manual

32
Start-up
rigid cable [mm
2
] flexible cable with/without ferrule
[mm
2
]
0.75 – 1.0 0.75 – 1.0
5.2 Connection assignment
5.2.1 Configuration of the open collector output:
see fig. 2
5.2.2 Configuration with relay switching output:
see fig. 3
5.3 Connection examples
The PCB can be operated in an operating voltage range
between 5 to 25 V.
As an alternative to direct switching of loads by the minia-
ture relay, the PCB can control the relay switching mod-
ule RSM1, if switching of higher loads is required. Con-
trolling of other external power relays is possible as well.
The connection examples on the following pages show
typical applications of the PCB: