Full Product Manual
4
FINISH MAX
®
FINE FINISH SPRAYER (C800766) ENGLISH
FAST START QUICK REFERENCE GUIDE
Cleaning Instructions
Spraying Instructions
This is only a quick reference.
Read the entire instruction manual prior to using the product.
5. Plug sprayer into outlet. 6. Adjust spray pattern to horizontal,
vertical, or cone. (See page 8.)
7. Set the flow to maximum by
turning the volume control knob
fully clockwise.
8. Spray surface, keeping sprayer
level. Use a sweeping and
overlapping motion.
5 6 7 8
HAZARDOUS VAPORS
1. Read all warnings and safety
instructions in the owner’s
manual before use.
2. Thin material as necessary.
(Seepage 7.) Remove and fill
container with material. Use a
filter to strain material if it is old.
3. Insert the pick-up tube into the
cylinder housing. See Page 6,
Figure B to determine orientation
of pick-up tube.
4. Attach container to sprayer.
1 2 3 4
1. Unplug sprayer, remove
container, and empty contents.
2. Fill sprayer with cleaning
solution, plug in sprayer, and
operate trigger until solution
comes through nozzle. Do not
submerge in liquid.
3. Remove parts. Clean and dry
thoroughly according to Step
Two of the Clean Up instructions.
See page 9.
1 2 3
See manual for grounding
instructions
SKIN INJECTION HAZARD
RISK OF EXPLOSION OR FIRE
HAZARDOUS VAPORS