Use and Care Manual

Assembly Instructions 3/3

STEP 2

Attach Back Frame (D) to unit with Flat Washers, Spring Washers,

Head Cap Bolts (short) and Head Cap Bolts (long), tightening bolts only halfway.

(See Figures 3 and 4)

Tighten all bolts used in Steps 1 and 2.

Insert Wood Screws into pre-drilled holes in unit, then tighten.

Head Cap Bolt (long)

Spring Washer

Flat Washer

Head Cap Bolt (short)

Spring Washer

Flat Washer

Wood Screw

Figure 4

Figure 3