Instructions / Assembly

Assembly Instructions 2/9
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Do not tighten all the bolts until each part is properly assembled.
 The unit must be level to work properly. Use the included adjustable levelers to level.
 Keep Hex Wrench as the bolts may need to be tightened in the future.
STEP 2
Attach Magnets to Front Rail (F) with
1/2” Round Head Screws into pre-drilled holes.
(See Figure 2)
Figure 2
1/2” Round Head Screw
Magnet
F
Cam Lock Screw
G
L
H
J
B
C
F
E
STEP 1
Insert Cam Lock Screws into pre-drilled holes in
Side Panels (B), (C), Front Rails (E), (F), Back Rails (G), (H),
Base (J) and Back Upright (L), then tighten.
(See Figure 1)
Figure 1