Instructions / Assembly

Assembly Instructions 5/9
STEP 7
Level unit by adjusting the adjustable levelers on bottom of unit. (See Figure 5)
Note: Unit must be level to proceed.
Insert 3/4” Round Head Screws into pre-drilled holes in back of unit, then tighten.
Note: Unit must be level before tightening these screws.
Attach Doors (M) and (N) to unit by sliding door hinges into side panel hinges. (See Figure 6)
Attach Knobs to Doors (M) and (N) with Machine Screws. (See Figure 7)
3/4” Round Head Screw
M
Knob
Machine Screw
Figure 7
Figure 5
Figure 6
N