Use and Care Manual

ManualsBrandsHOMESTYLES ManualsOutdoorsAruba Silver Stainless Steel & Solid Wood Teak Square Outdoor Dining Table

Hardware List

Part List

Home Styles Customer Service: www.homestyles-furniture.com,

servicedesk@homestyles-furniture.com,

888-680-7460, 877-831-0319

Tool(s) required for assembly: Level

20 05650 0036

Dining Table

IMPORTANT

Top

1 pc.

Carefully remove all the parts from the carton and

place them individually on a soft cloth to prevent

scratches or other damage.

Carefully and strictly follow these assembly instructions

to ensure a completed product as designed.

Do not use power tools above 8 volts to assemble.

Leg

4 pcs.

Hex Wrench

1 pc.

Small Hex Wrench

1 pc.

Flat Washer

8 pcs. (+1 extra)

M8x45

Head Cap Bolt

8 pcs. (+1 extra)

Cover

1 pc.

Summary of content (4 pages)

PAGE 1
20 05650 0036 Dining Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. Do not use power tools above 8 volts to assemble. Part List A. Top 1 pc. B. Leg 4 pcs. Hardware List Hex Wrench 1 pc. Small Hex Wrench 1 pc. Flat Washer 8 pcs. (+1 extra) M8x45 Head Cap Bolt 8 pcs.
PAGE 2
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Hex Wrench as the bolts may need to be tightened in the future. B Flat Washer Head Cap Bolt B B B A Figure 1 STEP 1 Place Top (A) upside down on a soft cloth. Attach Legs (B) to Top (A) with Flat Washers and Head Cap Bolts, tightening bolts only halfway.
PAGE 3
Assembly Instructions 3/3 Cover STEP 2 Turn table over to its upright position. Cover umbrella hole with Cover. Level unit by adjusting the adjustable levelers on bottom of legs.
PAGE 4
CARE INSTRUCTIONS Advisory Notes · · · · · · · Do not use power tools above 8 volts to assemble. Periodic structural checks of this furniture should be undertaken. Do not use if there are any doubts about its’ fitness for purpose. Exercise care so as to not trap fingers in any of the hinged parts of this furniture. Always use on firm level ground, ensuring that all legs remain in contact with the ground. Do not stand on a chair or sit or stand on any other item.