20 05700 0020 Accent Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. This product is made of aluminum. Do not use power tools above 8 volts to assemble and only tighten bolts until snug. Over tightening can damage the aluminum. Part List A. Top 1 pc. C. Leg 3 pcs. B. Stretcher 1 pc.
Assembly Instructions 2/2 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Wrench as the bolts may need to be tightened in the future. C STEP 1 Place Top (A) upside down on a soft cloth. Slide Legs (C) into slots in Top (A).
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
20 05700 0067 Umbrella Stand IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. This product is made of aluminum. Do not use power tools above 8 volts to assemble and only tighten bolts until snug. Over tightening can damage the aluminum. Part List A. Top 1 pc. B. Base 1 pc. Hardware List M12 Nut 1 pc.
Assembly Instructions 2/2 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. A B Flat Washer Spring Washer Nut STEP 1 Attach Top (A) to Base (B) with Flat Washer, Spring Washer and Nut.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
20 05700 0081 Arm Chair IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. This product is made of aluminum. Do not use power tools above 8 volts to assemble and only tighten bolts until snug. Over tightening can damage the aluminum. Part List B. Frame 1 pc. A. Seat 1 pc. D. Front Stretcher 1 pc. C. Frame 1 pc. E.
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Wrench as the bolts may need to be tightened in the future. STEP 1 Attach Front Stretcher (D) and Back Stretcher (E) to Frame (B) with Flat Washers, Spring Washers and Bolts (short), tightening bolts only halfway.
Assembly Instructions 3/3 STEP 3 Attach Frame (C) to unit with Flat Washers, Spring Washers, Bolts (short) and Bolts (long), tightening bolts only halfway. C Tighten all bolts used in all steps. Flat Washer Spring Washer Bolt (short) Flat Washer Spring Washer Bolt (long) STEP 4 Turn unit to its’ upright position. Cover all bolts with Caps.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
20 05700 0083 Chaise IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. This product is made of aluminum. Do not use power tools above 8 volts to assemble and only tighten bolts until snug. Over tightening can damage the aluminum. Part List A. Back 1 pc. B. Seat 1 pc. E. Stretcher 1 pc. F. Stretcher 1 pc. D.
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Hex Wrench and Wrench as the bolts may need to be tightened in the future. STEP 1 E Attach Stretchers (E) and (F) to Frame (C) with Spring Washers and Head Cap Bolts, tightening bolts only halfway.
Assembly Instructions 3/3 STEP 3 Attach Frame (D) to unit with Flat Washers, Spring Washers, Bolts and Head Cap Bolts, tightening bolts only halfway. D Flat Washer Spring Washer Bolt Flat Washer Spring Washer Bolt Spring Washer Head Cap Bolt A G STEP 4 Turn unit to its’ upright position. Attach Back (A) and Stretcher (G) to unit with Flat Washers, Spring Washers and Bolts, tightening bolts only halfway. Cap Tighten all bolts used in all steps. Cover all bolts with Caps.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
20 06700 0032 Dining Table IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. This product is made of aluminum. Do not use power tools above 8 volts to assemble and only tighten bolts until snug. Over tightening can damage the aluminum. Part List A. Top 1 pc. B. Leg 4 pcs. C Stretcher 1 pc.
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. The unit must be level to work properly. Use the included adjustable levelers to level. Keep Wrench as the bolts may need to be tightened in the future.
Assembly Instructions 3/3 STEP 2 Place Top (A) upside down on a soft cloth. Attach unit to Top (A) with Flat Washers, Spring Washers and Bolts, tightening bolts only halfway. Tighten all Bolts used in Steps 1 and 2. Cover all Bolts with Caps. Cap Bolt Spring Washer Flat Washer A Cover STEP 3 Turn unit over to its upright position. Cover umbrella hole with Cover. Level table by adjusting the adjustable levelers on bottom of legs.
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
20 06700 0055 Swivel Chair IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. This product is made of aluminum. Do not use power tools above 8 volts to assemble and only tighten bolts until snug. Over tightening can damage the aluminum. Part List A. Seat 1 pc. B. Frame 1 pc. C. Connector 1 pc. D. Base 1 pc.
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Wrench as the bolts may need to be tightened in the future. STEP 1 Attach Frame (B) to Connector (C) with Bolts (small), Flat Washers, Spring Washers (large), and Nuts tightening bolts only halfway. (See Figure 1) B Tighten all Bolts (small) and Nuts.
Assembly Instructions 3/3 STEP 2 Place unit onto Base (D). D A Bolt (large) Spring Washer (small) Round Flat Washer STEP 3 Attach Seat (A) to unit with Round Flat Washers, Spring Washers (small) and Bolts (large), tightening bolts only halfway. (See Figure 2) Tighten all Bolts (large).
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
20 06700 0055 Swivel Chair IMPORTANT Carefully remove all the parts from the carton and place them individually on a soft cloth to prevent scratches or other damage. Carefully and strictly follow these assembly instructions to ensure a completed product as designed. This product is made of aluminum. Do not use power tools above 8 volts to assemble and only tighten bolts until snug. Over tightening can damage the aluminum. Part List A. Seat 1 pc. B. Frame 1 pc. C. Connector 1 pc. D. Base 1 pc.
Assembly Instructions 2/3 IMPORTANT Use a soft cloth between these parts and the floor. Do not use power tools above 8 volts to assemble. Do not tighten all the bolts until each part is properly assembled. Keep Wrench as the bolts may need to be tightened in the future. STEP 1 Attach Frame (B) to Connector (C) with Bolts (small), Flat Washers, Spring Washers (large), and Nuts tightening bolts only halfway. (See Figure 1) B Tighten all Bolts (small) and Nuts.
Assembly Instructions 3/3 STEP 2 Place unit onto Base (D). D A Bolt (large) Spring Washer (small) Round Flat Washer STEP 3 Attach Seat (A) to unit with Round Flat Washers, Spring Washers (small) and Bolts (large), tightening bolts only halfway. (See Figure 2) Tighten all Bolts (large).
CARE INSTRUCTIONS NEVER NEVER use glass cleaners on finished furniture. Ammonia chemically attacks the finish. allow liquids to remain on furniture. Absorption causes parts to warp and split and finishes to delaminate. Do not use power tools above 8 volts to assemble. Do not place in direct sunlight. Do not write directly on surface. PREVENT CRACKING PREVENT FADING PREVENT MARKING Do not place hot objects on surface. Do not use rubber based placemats. Do not use commercial waxes and polishes.
