Installation Guide

LEFT ARM

ASSEMBLY INSTRUCTION

E021LS(3A)LOVE SEAT

1PC

RIGHT ARM

1PC

SEAT

1PC

BACK

1PC

BOLT

M6x90MM

2PCS

7PCS

FLAT WASHER

M6x12.5MM

2PCS

7PCS

BOLT

M6x45MM

FLAT WASHER

M6x18MM

LOCK NUT

9PCS

PVC COVER

9PCS

1PC

NUT CAP

WRENCH

This page lists all the contents included in the

box. Please take the time to identify the hardware

as well as the time to individual components to

this product. As you unpack and prepare for

assembly, place the contents on a carpeted or

padded area to protect them from damage.

PAGE 1
ASSEMBLY INSTRUCTION E021LS(3A)LOVE SEAT A LEFT ARM B RIGHT 1PC 1PC E BOLT M6x90MM F 2PCS I LOCK NUT 9PCS 1PC G FLAT WASHER M6x12.5MM BOLT M6x45MM NUT 1PC H 2PCS 7PCS J D BACK C SEAT ARM K CAP 9PCS PVC COVER 9PCS FLAT WASHER M6x18MM 7PCS L WRENCH 1PC This page lists all the contents included in the box. Please take the time to identify the hardware as well as the time to individual components to this product.
PAGE 2
1 Loosely attach the seat(C) and back(D) to the left arm (A) with bolts(E&F), lock washers(G&H), lock nut(I), wrench(L), nut cap(J) and PVC cover(K). C D J I G J I H D C A A F E L L K K A 2 Loosely attach the right arm (B) to the seat(C) and back(D) with bolts(E&F),lock washers(G&H), lock nut(I), wrench(L), nut cap(J) and PVC cover(K).
PAGE 3
Connect the back(D) and seat(C) with bolts(F),flat washers(H) and lock nut(I). Finally put the nut cap(J) and PVC cover(K). J D D I H C F L K C Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft doth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.