- HONDA 2008 Odyssey Automobile Owner's Manual

Store a driver’s seat position only
when the vehicle is parked.
Turn the ignition switch to the ON
(II) position. You cannot add a
new seat position in memory
unless the ignition switch is in the
ON (II) position. You can recall a
memorized position with the
ignition switch in any position.
Press and release the MEMO
button on the driver’s door. You
will hear a beep. Then, both
indicators in the memory buttons
will start to blink. Press and hold
one of the memory buttons (1 or
2) within 5 seconds after you press
the MEMO button. When the
system completes storing a new
driving position, you hear two
beeps. The indicator in the stored
memory button will come on.
Your vehicle has a memory feature
for the driver’s seat and outside
mirror positions.
Two seat and outside mirror
positionscanbestoredinseparate
memories. You select a memorized
position by pushing the appropriate
button or using the appropriate
remote transmitter (Driver 1 or
Driver 2).
You can change the ‘‘MEMORY
POSITION LINK’’ setting on the
multi-information display (see page
).
This setting can be linked or
unlinked with the remote transmitter.
For more information, see page .
Adjust the seat to a comfortable
position (see page ).
Adjust the outside mirrors for best
visibility (see page ).
1.
2.
3.
4.
149
116
170
191
On Touring model only
Storing a Driving Position in
Memory
Driving Position Memory System
184
MEMO BUTTON
MEMORY
BUTTONS
INDICATORS
０７／０９／０３ ２０：２８：５０ ３１ＳＨＪ６３０ ０１８９